|
|
|
|
|
|
|
|
|
|
|
Part Number: EPD-6
Architectural Covelight Accessories End Cap Finish - White ELCO Accessory
|
Part Number: EFPEN1
LED Flat Rope Light Accessories End Cap For EDF11 and EDF12 ELCO Flat Rope Light Accessory Finish - Clear
|
Part Number: EFPEN2
LED Flat Rope Light Accessories End Cap For EDF21 ELCO Flat Rope Light Accessory Finish - Clear
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPD-4
LED Flat Rope Light Accessories Mounting Clip For EDF11 and EDF12 ELCO Flat Rope Light Accessory
|
Part Number: EPMT
Outdoor Rope Light Accessory Mounting Clips ELCO Accessory Finish - Clear
|
Part Number: EPEN
Outdoor Rope Light Accessory End Caps ELCO Accessory Finish - Clear
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPD-7
LED Flat Rope Light Accessories Mounting Clip For EDF21 ELCO Flat Rope Light Accessory
|
Part Number: EPD-8
LED Flat Rope Light Accessories Open Mounting Clip For EDF11 and EDF12 ELCO Flat Rope Light Accessory
|
Part Number: EDU2RD
Wattage - 2.1w/ft. Voltage - 120v Life-Span - 30,000 Hours Finish - Red
Can Be Cut In 36" Increments (Every 24 Bulbs) Only One Power Cord, Power Connector, and End Cap Installed On Roll At Factory
Max Run 150ft. Price Per Foot.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD21CB8
Tape To Tape Mini Connector For E30CB Series Indoor Continuous COB Tape Light Accessory Ambio System
|
Part Number: EPSD21CB10
Tape To Tape Mini Connector For E44CB Series Indoor Continuous COB Tape Light Accessory Ambio System
|
Part Number: EPSD22CB8
10" Hard Wire Connector For E30CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Red/Black
Dimensions - 10"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD22CB10
10" Hard Wire Connector For E44CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Red/Black
Dimensions - 10"
|
Part Number: EPD-2
Architectural Covelight Accessories Terminal Block Finish - White ELCO Accessory
|
Part Number: EDU2BL
Wattage - 2.1w/ft. Voltage - 120v Life-Span - 30,000 Hours Finish - Blue
Can Be Cut In 36" Increments (Every 24 Bulbs) Only One Power Cord, Power Connector, and End Cap Installed On Roll At Factory
Max Run 150ft. Price Per Foot.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EDU2GR
Wattage - 2.1w/ft. Voltage - 120v Life-Span - 30,000 Hours Finish - Green
Can Be Cut In 36" Increments (Every 24 Bulbs) Only One Power Cord, Power Connector, and End Cap Installed On Roll At Factory
Max Run 150ft. Price Per Foot.
|
Part Number: EPSD21
Strip To Strip Connector 5/8" Sq. X 1/4" Indoor Tape Light Accessory Ambio System Finish - White
|
Part Number: EPSD22
Hardwire Connector 10" Indoor Tape Light Accessory Ambio System Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPIN
Outdoor Rope Light Accessory Invisible Splice ELCO Accessory Finish - Clear
|
Part Number: EUDMT31
Aluminum Channel Mounting Clips For Use With EUD31 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Aluminum/Silver
|
Part Number: EUDMT32
Aluminum Channel Mounting Clips For Use With EUD32 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Aluminum/Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDMT33
Aluminum Channel Mounting Clips For Use With EUD33 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Aluminum/Silver
|
Part Number: EUDMT34
Aluminum Channel Mounting Clips For Use With EUD34 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Aluminum/Silver
|
Part Number: EUDMT35
Aluminum Channel Mounting Clips For Use With EUD35 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Aluminum/Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDMT36
Aluminum Channel Mounting Clips For Use With EUD36 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Aluminum/Silver
|
Part Number: EUDMT37
Aluminum Channel Mounting Clips For Use With EUD37 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Aluminum/Silver
|
Part Number: EDU2LEDBL
Wattage - 0.96w/ft. Voltage - 120v Finish -Blue
Can Be Cut In 30" Increments (Every 30 LED's) Only One Power Cord, Power Connector, and End Cap Installed On Roll At Factory
Max Run 150ft. Price Per Foot.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EDU2LEDGR
Wattage - 0.96w/ft. Voltage - 120v Finish - Green
Can Be Cut In 30" Increments (Every 30 LED's) Only One Power Cord, Power Connector, and End Cap Installed On Roll At Factory
Max Run 150ft. Price Per Foot.
|
Part Number: EDU2
Wattage - 2.1w/ft. Voltage - 120v Life-Span - 30,000 Hours Finish - Clear
Can Be Cut In 36" Increments (Every 24 Bulbs) Only One Power Cord, Power Connector, and End Cap Installed On Roll At Factory
Max Run 150ft. Price Per Foot.
|
Part Number: EPSD20
Diamond Connector 3/8" Sq. X 5/16" H Indoor Tape Light Accessory Ambio System Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD19
Block Connector 3/8" W X 7/16" X 5/16" H Indoor Tape Light Accessory Ambio System Finish - White
|
Part Number: P10029 Part Number Description: ADP-RLGU24-N
Base Adapter GU24 Base Adapter Recessed Downlights NaturaLED Accessories Finish - White
|
Part Number: EPSD27L
L Shape Block Connector For 10MM Tape Lights 11/16" Sq. X 5/16" H Indoor Tape Light Accessory Ambio System Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD23-2
Extension Connector 2" Indoor Tape Light Accessory Ambio System Finish - White
|
Part Number: EL530W
Wattage - 75W Max. Bulb Type - PAR30/R30 Compatible - 5" Line Voltage IC/Non-IC Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Open Trim.
|
Part Number: EPSD1
Tape Light Linking Cable ELCO LED Tape Light Accessory 3 Pin 2 Wire Ambio System Finish - Pink/Black
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD2
Tape Light Linking Cable ELCO LED Tape Light Accessory 4 Pin 2 Wire Ambio System
|
Part Number: EPSD23
Extension Connector 10" Indoor Tape Light Accessory Ambio System Finish - White
|
Part Number: EPS2
Outdoor Rope Light Accessory Splice Connector ELCO Accessory Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD23CB10
Tape To Tape Connector With 10" Wire For E44CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Red/Black
Dimensions - 10"
|
Part Number: EPSD23CB8
Tape To Tape Connector With 10" Wire For E30CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Red/Black
Dimensions - 10"
|
Part Number: ELJ4OV
Oversized Goof Ring For 4" Recessed Housings ELCO Recessed Housing Accessories Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL30BZ
Wattage - 75W Max. Bulb Type - PAR30/R30 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - Bronze
Outer Diameter - 8"
6" Open Trim with Coil Springs.
|
Part Number: ELP40W
Wattage - 150W Max. Bulb Type - R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
Baffle helps reduce glare.
|
Part Number: ELP40B
Wattage - 150W Max. Bulb Type - R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 7 1/4"
Baffle helps reduce glare.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD24
Extension Connector 24" Indoor Tape Light Accessory Ambio System Finish - White
|
Part Number: PSA21
Socket Adapter Medium Screw into GU-24
|
Part Number: EPSD3
Tape Light Linking Cable ELCO LED Tape Light Accessory 4 Pin 4 Wire Ambio System
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM5W
5" Metal Trim Ring For 5" Trims Finish - White
Outer Diameter - 6 1/4"
|
Part Number: PSA30
Socket Adapter: Medium Base (E26) to Ideal LED connector
|
Part Number: EPSD25
DC Power Adapter 6" Indoor Tape Light Accessory Ambio System Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPS27
Tape Light Extension Connector ELCO LED Tape Light Accessory 10" Wire Lead Fit Ambio System Finish - White
|
Part Number: EPS28
Tape Light Extension Connector ELCO LED Tape Light Accessory 24" Wire Lead Fit Ambio System Finish - White
|
Part Number: EPS26
Tape Light Hardwire Connector ELCO LED Tape Light Accessory 10" Wire Lead Fit Ambio System Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPN2
Outdoor Rope Light Accessory Power Connector For EPCLED ELCO Accessory Finish - White
|
Part Number: EPNLED
LED Duralight Accessory Power Connector ELCO Accessory Finish - White
|
Part Number: EPS12
Tape Light Connector ELCO LED Tape Light Accessory 3 Pin 2 Wire Ambio System Finish - Black
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPS13
Tape Light Connector ELCO LED Tape Light Accessory 4 Pin 2 Wire Ambio System
|
Part Number: PSA38-22
Rewiring Kit to Ideal LED connector
|
Part Number: EP989B
T-Bar Attachment Clip Track Accessory Allows Track To Be Attached To Inverted T-Bar Ceiling One (1) Clip Included Finish - Silver
ELCO Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPS14
Tape Light Connector ELCO LED Tape Light Accessory 4 Pin 4 Wire Ambio System
|
Part Number: EUDL36
Aluminum Channel Lens For Use With EUD36 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Frosted
|
Part Number: EUDL37
Aluminum Channel Lens For Use With EUD37 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Frosted
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDL31C
Aluminum Channel Lens For Use With EUD31, EUD32, EUD37 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Clear
|
Part Number: EUDL32C
Aluminum Channel Lens For Use With EUD32 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Clear
|
Part Number: EUDL33C
Aluminum Channel Lens For Use With EUD33 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Clear
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDL34C
Aluminum Channel Lens For Use With EUD34 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Clear
|
Part Number: EUDL35C
Aluminum Channel Lens For Use With EUD35 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Clear
|
Part Number: EUDL36C
Aluminum Channel Lens For Use With EUD36 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Clear
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDL37C
Aluminum Channel Lens For Use With EUD37 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Clear
|
Part Number: EFPS21
LED Flat Rope Light Accessories Splice Connector For EDF11 and EDF12 ELCO Flat Rope Light Accessory Finish - White
|
Part Number: EFPS22
LED Flat Rope Light Accessories Splice Connector For EDF21 ELCO Flat Rope Light Accessory Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: L49
Diffuser Lens
For a softer light Koto Module Accessories
|
Part Number: EPSD27LCB8
Tape To Tape Light L-Connector For E30CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Clear
|
Part Number: EPSD27LCB10
Tape To Tape Light L-Connector For E44CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Clear
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM30W
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: ELM305W
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Inner Diameter - 5 3/4" Outer Diameter - 7 1/4"
Baffle helps reduce glare.
|
Part Number: EEP3A Part Number Description: Battery Backup
ELCO Exit Sign/Emergency Light Accessory Battery Backup Finish - Blue
Voltage - 4.8V 700mA Hour
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: P012S
Socket Adapter Socket Assembly, Wire and Thermal Protector For EL71C and R10H
|
Part Number: EL308W
Wattage - 75W Max. Bulb Type - PAR30/R30 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Open Splay Trim.
|
Part Number: PR2B
Flexa Reflector For 2" Round Ring Interchangeable Reflector Trims For Use With - E2L10, E2L13, E2L14, and E2L15 Finish - Black
ELCO Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM5BZ
5" Metal Trim Ring For 5" Trims Finish - Bronze
Outer Diameter - 6 1/4"
|
Part Number: RM5N
5" Metal Trim Ring For 5" Trims Finish - Nickel
Outer Diameter - 6 1/4"
|
Part Number: RM5CP
5" Metal Trim Ring For 5" Trims Finish - Copper
Outer Diameter - 6 1/4"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EDF12WW-CC
Dimmable - See ELCO Dimmer Chart
Wattage - 0.50w/ft. Voltage - 120v
Color Temp - Warm White Lumens - 45lm/ft. Finish - Clear
Width - 29/64" (11.6mm) Field Cuttable - Every 3ft.
Custom Cut. Max Run 180ft.
|
Part Number: EDF11WW-CC
Dimmable - See ELCO Dimmer Chart
Wattage - 1w/ft. Voltage - 120v
Color Temp - Warm White Lumens - 90lm/ft. Finish - Clear
Width - 29/64" (11.6mm) Field Cuttable - Every 1.5ft.
Custom Cut. Max Run 90ft.
|
Part Number: ELM30B
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E15-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 1.5w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 124lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E22-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 2.2w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 185lm/ft. Finish - Clear
Width - 3/8" (10mm) Field Cuttable - Every 8 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: EDU2LEDWW-CC
Wattage - 0.96w/ft. Voltage - 120v
Color Temp - Warm White Lumens - 76lm/ft. Finish - Clear
Width - 29/64" (11.6mm) Requires Accessories - Sold Separately!
Custom Cut. Max Run 150ft. Price Per Foot.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EDU2LEDCW-CC
Wattage - 0.96w/ft. Voltage - 120v
Color Temp - Cool White Lumens - 76lm/ft. Finish - Clear
Width - 29/64" (11.6mm) Requires Accessories - Sold Separately!
Custom Cut. Max Run 150ft. Price Per Foot.
|
Part Number: EUL12-3
Lens for EUN Series/Replacement Lens For T5 Fluorescent Undercabinet Lights 12" Lens For EUN12E
Width - 3 1/2"
|
Part Number: EUBC03
Linking Connector For Lotus System ELCO LED Undercabinet Light Accessory 3" Linking Connector Finish - White
Length - 3"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPS29
Tape Light Hardwire Connector ELCO LED Tape Light Accessory 24" Wire Lead Fit Ambio System Finish - White
|
Part Number: PSA27
Socket Adapter For 4" Eyeball to Fit HALO Housings
|
Part Number: ELM301W
Wattage - (1) 42W Max./75W Max./90W Max./120W Max. Bulb Type - CFL/PAR30/R30/PAR38/BR40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Inner Diameter - 5 3/4" Outer Diameter - 7 1/4"
Includes Torsion Springs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL511W
Wattage - 75W Max. PAR30 or R30 Bulb Type - PAR30 or R30 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Metal Splay Baffle Trim.
|
Part Number: E22-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 2.2w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 185lm/ft. Finish - Clear
Width - 3/8" (10mm) Field Cuttable - Every 8 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E22-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 2.2w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 185lm/ft. Finish - Clear
Width - 3/8" (10mm) Field Cuttable - Every 8 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPT2
Outdoor Rope Light Accessory Tee Connector ELCO Accessory Finish - Clear
|
Part Number: EMP6 New Construction Round Mounting Plate!
New construction mounting plate for 6" Ultra Slim LED Round Panel Lights.
|
Part Number: EL993MB
Wattage - 50w Max Bulb Type - PAR20/A19/R16/R20 Base Medium Base (E26) PAR Type Finish - Black/White Trim
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 40W Max., A19/R16 Metal Step Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELIGRH
In-Ground Sleeve ELCO In-Ground LED Fixture Accessories Suitable for Concrete or Soil Installation Finish - Black
Diameter - 1 3/4" Height - 3 3/8" Base Diameter - 2 1/8"
Weather Resistant in-ground sleeve.
|
Part Number: EL304W
Wattage - 75W Max. Bulb Type - PAR30/R30 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Wide Flange Baffle Trim.
|
Part Number: EL304B
Wattage - 75W Max. Bulb Type - PAR30/R30 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 8"
6" Wide Flange Baffle Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM30BOV
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Black
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim with Oversized Ring.
|
Part Number: ELM30WOV
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim with Oversized Ring.
|
Part Number: ELM530W
Wattage - 42W Max. CFL/75W Max. PAR30 or R30 Bulb Type - CFL/PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Metal Stepped Baffle with Coil Springs Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL513SH
Wattage - 42W Max./60w Max. Bulb Type - CFL/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 6 1/4"
5" Shower Trim with Fresnel Lens.
|
Part Number: ELM500W
Wattage - 75W Max. PAR30 or R30/90W Max. PAR38/60W Max. A19 Bulb Type - PAR30 or R30/PAR38/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Airtight Metal Cone Baffle Trim.
|
Part Number: ELM501W
Wattage - 75W Max. PAR30 or R30/90W Max. PAR38/60W Max. A19 Bulb Type - PAR30 or R30/PAR38/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Airtight Metal Cone Reflector Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL512SH
Wattage - 60w Max. Bulb Type - A19 Compatible - 5" Line Voltage IC and Non-IC and Shallow Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 6 1/4"
5" Shower Trim with Albalite Lens.
|
Part Number: EUDL31
Aluminum Channel Lens For Use With EUD31, EUD32, EUD37 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Frosted
|
Part Number: EUDL32
Aluminum Channel Lens For Use With EUD32 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Frosted
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDL33
Aluminum Channel Lens For Use With EUD33 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Frosted
|
Part Number: EUDL34
Aluminum Channel Lens For Use With EUD34 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Frosted
|
Part Number: EUDL35
Aluminum Channel Lens For Use With EUD35 8 Feet Long ELCO Tape Light Accessory Ambio System Finish - Frosted
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM4W
4" Metal Trim Ring For 4" Trims Finish - White
Outer Diameter - 4 3/4"
|
Part Number: RM4B
4" Metal Trim Ring For 4" Trims Finish - Black
Outer Diameter - 4 3/4"
|
Part Number: OM5B
5" Metal Trim Ring For 5" Trims Oversized Metal Ring Finish - Black
Outer Diameter - 7 1/4"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: OM5W
5" Metal Trim Ring For 5" Trims Oversized Metal Ring Finish - White
Outer Diameter - 7 1/4"
|
Part Number: RM5B
5" Metal Trim Ring For 5" Trims Finish - Black
Outer Diameter - 6 1/4"
|
Part Number: EPN11
Power Connector ELCO LED Tape Light Accessory 6" Power Connector Ambio System Finish - Black
Length - 6"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDEN31
Aluminum Channel End Caps For Use With EUD31 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Grey
|
Part Number: EUDEN32
Aluminum Channel End Caps For Use With EUD32 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Grey
|
Part Number: EUDEN33
Aluminum Channel End Caps For Use With EUD33 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Grey
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDEN34
Aluminum Channel End Caps For Use With EUD34 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Grey
|
Part Number: EUDEN35
Aluminum Channel End Caps For Use With EUD35 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Grey
|
Part Number: EUDEN36
Aluminum Channel End Caps For Use With EUD36 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Grey
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUDEN37
Aluminum Channel End Caps For Use With EUD37 Set Of Two (2) ELCO Tape Light Accessory Ambio System Finish - Grey
|
Part Number: EFPGL
LED Flat Rope Light Accessories Glue Tube For End Caps, Power Cords, and Splice Connectors ELCO Flat Rope Light Accessory Finish - White/Clear
|
Part Number: ELM40B
Wattage - 150W Max. Bulb Type - PAR38/R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/White
Outer Diameter - 7 1/4"
6" Metal Stepped Baffle Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM40WOV
Wattage - 150W Max. Bulb Type - PAR38/R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
6" Metal Stepped Baffle Trim with Oversized Ring.
|
Part Number: ELM40W
Wattage - 150W Max. Bulb Type - PAR38/R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
6" Metal Stepped Baffle Trim.
|
Part Number: ELM40BOV
Wattage - 150W Max. Bulb Type - PAR38/R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Black
Outer Diameter - 7 1/4"
6" Metal Stepped Baffle Trim with Oversized Ring.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E1LF1 New Construction Frame for ELCO Oak Recessed!
New construction Frame for Oak series downlights For E1L02 and E1L12 Requires Transformer IC Rated with E1L02 and E1L12
|
Part Number: E1LF2 New Construction Frame for ELCO Oak Recessed!
New construction Frame for Oak series adjustable 2 3/8" Cutout For E1L32 and E1L22 Requires Transformer IC Rated with E1L32 and E1L22
|
Reorder Part Number: P10310 Part Number Description: PLT-NC/DL/UNV
2"/4"/6" Round Pre-Mounting Plate Universal Pre-Mounting Plate For Slim Downlights NaturaLED Accessories Finish - Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E15-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 1.5w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 124lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E15-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 1.5w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 124lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E4LF1 New Construction Frame with Hanger Bars!
New construction Frame with Captive Hanger Bars for LED Ultra Slim Panel Lights. 4" Round Frame.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELSPMNT468
Sky Panel Mounting Bracket For 4" and 6" Recessed Housings ELCO Recessed Housing Accessories Finish - Orange/Silver/Black
|
Part Number: EP713C
Interchangeable Lens For Oak Recessed Downlights Field Changeable For E1L02, E1L12, and E1L32 Beam Angle - 28°
ELCO Oak Series Accessories
|
Part Number: EP715C
Interchangeable Lens For Oak Recessed Downlights Field Changeable For E1L02, E1L12, and E1L32 Beam Angle - 50°
ELCO Oak Series Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EP716C
Interchangeable Lens For ELCO 2" Trims Beam Angle - 28°
ELCO Accessories.
|
Part Number: EP718C
Interchangeable Lens For ELCO 2" Trims Beam Angle - 60°
ELCO Accessories.
|
Part Number: EP717C
Field Changeable Optics Interchangeable Lens For ELCO 2" Trims Beam Angle - 38°
ELCO Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM3W
3" Metal Trim Rings Bulb Type - MR16 LED/Non-LED Finish - White
I.D. - 3 1/8" O.D. - 4 5/16"
ELCO Accessories.
|
Part Number: RM3B
3" Metal Trim Rings Bulb Type - MR16 LED/Non-LED Finish - Black
I.D. - 3 1/8" O.D. - 4 5/16"
ELCO Accessories.
|
Part Number: E44-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 360lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E44-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 360lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E44-2435
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 3500K Lumens - 360lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E44-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 360lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPC2
2-Wire Duralight Accessory Power Cord ELCO Accessory Finish - White
|
Part Number: EUD31
Dimmable - With ELCO Dimmable Drivers
Wattage - Customizable Voltage - 24v
Customizable CCT - 27/30/40K Aluminum Channel Mount - Included Finish - Silver/Aluminum
Height - 5/16"
Inner Channel Width - 1/2" (12mm) Outer Channel Width - 11/16"
Available in custom cuts. CA Title 24 JA8 compliant.
|
Part Number: EUD37
Dimmable - With ELCO Dimmable Drivers
Wattage - Customizable Voltage - 24v
Customizable CCT - 27/30/40K Aluminum Channel Mount - Included Finish - Silver/Aluminum
Height - 5/16"
Inner Channel Width - 1/2" (12mm) Outer Channel Top Width - 1"
Available in custom cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E30CB-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 3.0w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 245lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 1 25/32"
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E30CB-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 3.0w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 260lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 1 25/32"
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E30CB-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 3.0w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 275lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 1 25/32"
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EP712C
Interchangeable Lens For LED Pull-Down Beam Angle - 60°
Koto Module Accessories
|
Part Number: EPSD28XCB10
Tape To Tape Light X-Connector For E44CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Clear
|
Part Number: EPSD28XCB8
Tape To Tape Light X-Connector For E30CB Series Indoor Continuous COB Tape Light Accessory Ambio System Finish - Clear
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EF26-24WW
Dimmable - With ELCO Dimmable Drivers
Wattage - 1.8w/ft. Voltage - 24v
CCT - 3000K Lumens - 200lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 4 Inches
Available in Custom Cuts or 16ft. Reels. CA Title 24 JA8 compliant.
|
Part Number: EF26-24CW
Dimmable - With ELCO Dimmable Drivers
Wattage - 1.8w/ft. Voltage - 24v
CCT - 6500K Lumens - 200lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 4 Inches
Available in Custom Cuts or 16ft. Reels. CA Title 24 JA8 compliant.
|
Part Number: E44CB-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.5w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 365lm/ft. Finish - Clear
Width - 3/8" (10mm) Field Cuttable - Every 1 25/32 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E44CB-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.5w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 385lm/ft. Finish - Clear
Width - 3/8" (10mm) Field Cuttable - Every 1 25/32 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E44CB-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.5w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 425lm/ft. Finish - Clear
Width - 3/8" (10mm) Field Cuttable - Every 1 25/32 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: EL12SH
Wattage - 42W Max./60w Max. Bulb Type - 4 Pin CFL/A19/Par Type Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 8"
6" Shower Trim with Albalite Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL114SH
Wattage - 60W Max. Bulb Type - A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 7 3/4"
6" Shower Trim with Diffused Dome Lens and Reflector.
|
Part Number: ELA101WA
Wattage - 42W Max. CFL/75W Max. PAR30/100W Max. A19 Bulb Type - CFL/PAR30/A19 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
6" Reflector with Metal Baffle Trim.
|
Part Number: ELM30BZ
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Bronze/Bronze
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM530B
Wattage - 42W Max. CFL/75W Max. PAR30 or R30 Bulb Type - CFL/PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 6 1/4"
5" Metal Stepped Baffle with Coil Springs Trim.
|
Part Number: EL518CP
Wattage - 75W Max. Bulb Type - PAR30 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Copper/Copper
Outer Diameter - 6 1/4"
5" Eyeball with Trim Ring.
|
Part Number: ELA5099B
Wattage - 60W Max. A19 Bulb Type - A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 6 1/2"
5" Reflector with Socket Bracket Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELA5099W
Wattage - 60W Max. A19 Bulb Type - A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/2"
5" Reflector with Socket Bracket Trim.
|
Part Number: ELS520W
Wattage - 75W Max. PAR20 or R20 Bulb Type - PAR20 or R20 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Reflector Trim.
|
Part Number: ELS520G
Wattage - 75W Max. PAR20 or R20 Bulb Type - PAR20 or R20 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Gold/White Trim
Outer Diameter - 6 1/4"
5" Reflector Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELS5030W
Wattage - 75W Max. PAR30 or R30 Bulb Type - PAR30 or R30 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/2"
5" Phenolic Baffle Trim with Socket Bracket.
|
Part Number: ELST10W
Step Replacement Open Faceplate For ELST21 Finish - White
Height - 5" Length - 9 1/2"
|
Part Number: EL912W
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUL21-3
Lens for EUN Series/Replacement Lens For T5 Fluorescent Undercabinet Lights 21" Lens For EUN21E
Width - 3 1/2"
|
Part Number: EUL21
Lens for EUN Series/Replacement Lens For T5 Fluorescent Undercabinet Lights 21" Lens For EUN21E
Width - 5"
|
Part Number: E2LF1 New Construction Frame for ELCO Teak Recessed!
New construction Frame for Teak series inserts. Requires Teak Power Pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: L46
Linear Lens
Provides a wide rectangular illumination pattern Koto Module Accessories
|
Part Number: PSA32
Socket Adapter Medium Screw into GU10 Without Lamp
|
Part Number: EPSD26
6" Tape-To-Power Diamond Connector 6" Wire and Includes Flathead Screwdriver Indoor Tape Light Accessory Ambio System
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: L52-BLUE
Blue Lens
Koto Module Accessories
|
Part Number: L50B
Black Koto Snoot
Koto Module Accessories
|
Part Number: L50W
White Koto Snoot
Koto Module Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: L51
Color Shifter Lens Reduces color temperature of Koto module by ~400K
Koto Module Accessories
|
Part Number: EPCH
Outdoor Rope Light Accessory 6ft. Channel ELCO Accessory Finish - Clear
|
Part Number: RM4BZ
4" Metal Trim Ring For 4" Trims Finish - Bronze
Outer Diameter - 4 3/4"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM4G
4" Metal Trim Ring For 4" Trims Finish - Gold
Outer Diameter - 4 3/4"
|
Part Number: E6LF1 New Construction Frame with Hanger Bars!
New construction Frame with Captive Hanger Bars for LED Ultra Slim Panel Lights. 6" Round Frame.
|
Part Number: EL514W
Wattage - 42W Max./60w Max. Bulb Type - CFL/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White
Outer Diameter - 6 1/4"
5" Shower Trim with Diffused Dome Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL518N
Wattage - 75W Max. Bulb Type - PAR30 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Nickel/Nickel
Outer Diameter - 6 1/4"
5" Eyeball with Trim Ring.
|
Part Number: RM5G
5" Metal Trim Ring For 5" Trims Finish - Gold
Outer Diameter - 6 1/4"
|
Part Number: RM5C
5" Metal Trim Ring For 5" Trims Finish - Chrome
Outer Diameter - 6 1/4"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELSF1130W
Triac/ELV/Dimmable
Wattage - 15w
Voltage - 120V Lumens - 900lm CCT - 3000K Finish - White/White
Outer Diameter - 7 1/4" Height - 1 1/4"
CA Title 24 JA8-2016 compliant.
|
Part Number: EUBCRD
Power Cord and Plug ELCO LED Tape Light Accessory 8" Power Cord and Plug Ambio System Finish - White
Length - 8"
|
Part Number: ELM30BB
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Black
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELS30CP
Wattage - 42W Max./75W Max. Bulb Type - CFL/PAR30 or R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Copper/Copper
Outer Diameter - 7 1/4"
Clips securely mount trim into housing.
|
Part Number: EDIS6
Mini Puck Light Accessory 6-Way Distributor Voltage - 12V Output Match with Aster System Lights Connector
|
Part Number: L47
Spread Lens
Provides a symmetrical broadening of light beams Koto Module Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL518G
Wattage - 75W Max. Bulb Type - PAR30 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Gold/Gold
Outer Diameter - 6 1/4"
5" Eyeball with Trim Ring.
|
Part Number: EUL24-3
Lens for EUN Series/Replacement Lens For T5 Fluorescent Undercabinet Lights 24" Lens For EUN24E
Width - 3 1/2"
|
Part Number: ELL4813W
Bulb Type - PAR20 Die-Cast Aluminum Finish - White/White
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELL4810W
Bulb Type - PAR20 Die-Cast Aluminum Finish - White/White
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Reflector Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EP714C
Interchangeable Lens For Oak Recessed Downlights Field Changeable For E1L02, E1L12, and E1L32 Beam Angle - 38°
ELCO Oak Series Accessories
|
Part Number: RM1BB
Oak System Trims Round - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Black/Black
ELCO Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM1W
Oak System Trims Round - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - White/White
ELCO Accessories.
|
Part Number: RM1BZ
Oak System Trims Round - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Bronze/Bronze
ELCO Accessories.
|
Part Number: RM11W
Oak System Trims Square - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - White/White
ELCO Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM11BB
Oak System Trims Square - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Black/Black
ELCO Accessories.
|
Part Number: RM11BZ
Oak System Trims Square - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Bronze/Bronze
ELCO Accessories.
|
Part Number: PSA25
Socket Adapter For HALO 5" Trims to Fit ELCO Housings
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM3BZ
3" Metal Trim Rings Bulb Type - MR16 LED/Non-LED Finish - Bronze
I.D. - 3 1/8" O.D. - 4 5/16"
ELCO Accessories.
|
Part Number: RM3G
3" Metal Trim Rings Bulb Type - MR16 LED/Non-LED Finish - Gold
I.D. - 3 1/8" O.D. - 4 5/16"
ELCO Accessories.
|
Part Number: RM3N
3" Metal Trim Rings Bulb Type - MR16 LED/Non-LED Finish - Nickel
I.D. - 3 1/8" O.D. - 4 5/16"
ELCO Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM3C
3" Metal Trim Rings Bulb Type - MR16 LED/Non-LED Finish - Chrome
I.D. - 3 1/8" O.D. - 4 5/16"
ELCO Accessories.
|
Part Number: EL901C
Wattage - 75w Max Bulb Type - LED, PAR30, PAR Type Base - Medium Base (E26) Finish - Clear
O.D. - 5 1/16"
Lamp - 75W Max., PAR30, PAR Type Airtight Baffle Trim Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL993MW
Wattage - 50w Max Bulb Type - PAR20/A19/R16/R20 Base Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 40W Max., A19/R16 Metal Step Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL993KW
Wattage - 50w Max Bulb Type - PAR20/A19/R16/R20 Base Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 40W Max., A19/R16 Integral Socket Bracket/Controls Lamp Height Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL12W
Wattage - 42W Max./60w Max. Bulb Type - 4 Pin CFL/A19/Par Type Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Shower Trim with Albalite Lens.
|
Part Number: ELM302BB
Wattage - (1) 42W Max./75W Max./90W Max./120W Max. Bulb Type - CFL/PAR30/R30/PAR38/BR40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Black
Outer Diameter - 7 1/4"
Clips included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM530KB
Wattage - 75W Max. PAR30 or R30 Bulb Type - PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 6 1/4"
5" Metal Stepped Baffle with Socket Bracket Trim.
|
Part Number: ELM530KW
Wattage - 75W Max. PAR30 or R30 Bulb Type - PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Metal Stepped Baffle with Socket Bracket Trim.
|
Part Number: ELM500B
Wattage - 75W Max. PAR30 or R30/90W Max. PAR38/60W Max. A19 Bulb Type - PAR30 or R30/PAR38/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Black/Black
Outer Diameter - 6 1/4"
5" Airtight Metal Cone Baffle Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUBC06
Linking Connector For Lotus System ELCO LED Undercabinet Light Accessory 6" Linking Connector Finish - White
Length - 6"
|
Part Number: EUBC12
Linking Connector For Lotus System ELCO LED Undercabinet Light Accessory 12" Linking Connector Finish - White
Length - 12"
|
Part Number: EUBJBX
J-Box For Lotus System ELCO LED Undercabinet Light Accessory J-Box For Hard Wire Supply Connection Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUBJBXBZ
J-Box For Lotus System ELCO LED Undercabinet Light Accessory J-Box For Hard Wire Supply Connection Finish - Bronze
|
Part Number: ELST10B
Step Replacement Open Faceplate For ELST21 Finish - Black
Height - 5" Length - 9 1/2"
|
Part Number: ELST10BZ
Step Replacement Open Faceplate For ELST21 Finish - Bronze
Height - 5" Length - 9 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL522SH
Wattage - 42W Max. CFL/60W Max. A19 Bulb Type - CFL/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 6 1/4"
5" Shower Trim with Frosted Lens.
|
Part Number: ELM501B
Wattage - 75W Max. PAR30 or R30/90W Max. PAR38/60W Max. A19 Bulb Type - PAR30 or R30/PAR38/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Black/Black
Outer Diameter - 6 1/4"
5" Airtight Metal Cone Reflector Trim.
|
Part Number: E2LKF1 New Construction Frame with Hanger Bars!
2" Canless Koto Plaster New Construction Frame Includes Hanger Bars for Remodel Power Packs Requires Remodel IC Power Pack (Sold Separately) ELCO Koto System Accessories/Parts
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E3LKF1 New Construction Frame with Hanger Bars!
3" Canless Koto Plaster New Construction Frame Includes Hanger Bars for Remodel Power Packs Requires Remodel IC Power Pack (Sold Separately) ELCO Koto System Accessories/Parts
|
Part Number: E225W
Wattage - 20w Voltage - 12v Bulb Type - JC Style Cutout - 1 7/8" Finish - White
Height - 7/8" Diameter - 2 3/4"
E.T.L. Listed for remote transformer.
|
Part Number: E225B
Wattage - 20w Voltage - 12v Bulb Type - JC Style Cutout - 1 7/8" Finish - Black
Height - 7/8" Diameter - 2 3/4"
E.T.L. Listed for remote transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E234W
Wattage - 35w Voltage - 12v Bulb Type - MR16 (Not Included) Cutout - 3 1/8" Finish - White
E.T.L. Listed for remote transformer. Damp Location Listed.
|
Part Number: E234G
Wattage - 35w Voltage - 12v Bulb Type - MR16 (Not Included) Cutout - 3 1/8" Finish - Gold
E.T.L. Listed for remote transformer. Damp Location Listed.
|
Part Number: E234N
Wattage - 35w Voltage - 12v Bulb Type - MR16 (Not Included) Cutout - 3 1/8" Finish - Nickel
E.T.L. Listed for remote transformer. Damp Location Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E1LDWN1 New Construction Frame for ELCO Oak Recessed!
New construction Frame for Oak series downlights Large - 6" X 8" Requires Transformer
|
Part Number: EWPPHB1 Part Number Description: Button Photocell
Button and Swivel Photocells
Voltage - 120v
Button Photocell: Fixed position photocell allows the luminaire to automatically be lit in the absence of daylight. Works with 120v. For automatic dusk to dawn lighting.
|
Part Number: EL911W
Wattage - 30w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Clear Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPSD26-60
60" Tape-To-Power Diamond Connector 60" Wire and Includes Flathead Screwdriver Indoor Tape Light Accessory Ambio System
|
Part Number: EPSD26-72
72" Tape-To-Power Diamond Connector 72" Wire and Includes Flathead Screwdriver Indoor Tape Light Accessory Ambio System
|
Part Number: EL13SH
Wattage - 60w Max. Bulb Type - A19/LED Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 8"
6" Shower Trim with Fresnel Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL13W
Wattage - 60w Max. Bulb Type - A19/LED Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Shower Trim with Fresnel Lens.
|
Part Number: EL16W
Wattage - 42W Max./13W/60w Max. Bulb Type - CFL/Quad/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Shower Trim with Drop Opal Lens.
|
Part Number: ELS530CP
Wattage - 75W Max. PAR30 or R30 Bulb Type - PAR30 or R30 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Copper/White Trim
Outer Diameter - 6 1/4"
5" Reflector with Coils Springs Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL511B
Wattage - 75W Max. PAR30 or R30 Bulb Type - PAR30 or R30 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 6 1/4"
5" Metal Splay Baffle Trim.
|
Part Number: EUBCRD
Power Cord For Lotus System ELCO LED Undercabinet Light Accessory 5" Power Cord Finish - White
Length - 5"
|
Part Number: RM4CP
4" Metal Trim Ring For 4" Trims Finish - Copper
Outer Diameter - 4 3/4"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM4N
4" Metal Trim Ring For 4" Trims Finish - Nickel
Outer Diameter - 4 3/4"
|
Part Number: RP4SH
4" Plastic Trim Ring For 4" Trims Finish - White Lexan
Outer Diameter - 4 3/4"
|
Part Number: EDF21WW-CC
Dimmable - See ELCO Dimmer Chart
Wattage - 3w/ft. Voltage - 120v
Color Temp - Warm White Lumens - 240lm/ft. Finish - Clear
Width - 1/2" (12.6mm) Field Cuttable - Every 1.5ft.
Custom Cut. Max Run 30ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EPCLED
Outdoor Rope Light Accessory Power Cord For EDU2LED ELCO Accessory Finish - White
|
Part Number: ELM40BZ
Wattage - 150W Max. Bulb Type - PAR38/R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Bronze/Bronze
Outer Diameter - 7 1/4"
6" Metal Stepped Baffle Trim.
|
Part Number: OM4W
4" Metal Trim Ring For 4" Trims Oversized Metal Ring Finish - White
Outer Diameter - 5 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: OM4B
4" Metal Trim Ring For 4" Trims Oversized Metal Ring Finish - Black
Outer Diameter - 5 1/2"
|
Part Number: OM4BZ
4" Metal Trim Ring For 4" Trims Oversized Metal Ring Finish - Bronze
Outer Diameter - 5 1/2"
|
Part Number: EL41030W
Dimmable/Triac/ELV
Wattage - 10w Voltage - 120v Lumens - 770lm Color Temp - 3000K Finish - White/White
Height - 3" Outer Diameter - 5 1/2"
5 year limited factory warranty. CA Title 24 JA8-2019 Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL41530W
Dimmable/Triac/ELV
Wattage - 11w (60w equivalent) Voltage - 120v Lumens - 770lm Color Temp - 3000K Finish - White
Depth - 3 3/8" Diameter - 5 1/2"
5 year factory warranty (limited).
|
Part Number: EL41027W
Dimmable/Triac/ELV
Wattage - 10w Voltage - 120v Lumens - 740lm Color Temp - 2700K Finish - White/White
Height - 3" Outer Diameter - 5 1/2"
5 year limited factory warranty. CA Title 24 JA8-2019 Compliant.
|
Part Number: EL41035W
Dimmable/Triac/ELV
Wattage - 10w Voltage - 120v Lumens - 800lm Color Temp - 3500K Finish - White/White
Height - 3" Outer Diameter - 5 1/2"
5 year limited factory warranty. CA Title 24 JA8-2019 Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL41040W
Dimmable/Triac/ELV
Wattage - 10w Voltage - 120v Lumens - 830lm Color Temp - 4000K Finish - White/White
Height - 3" Outer Diameter - 5 1/2"
5 year limited factory warranty. CA Title 24 JA8-2019 Compliant.
|
Part Number: ERT415W
Round Reflector Trim For 4" LED Round ELM Downlight ELCO Recessed Housing Accessories Finish - White/White
Trim Height - 1 1/4" Trim Inner Diameter - 3" Trim Outer Diameter - 4 1/2"
|
Part Number: E30-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 3.0w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 250lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E30-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 3.0w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 250lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E30-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 3.0w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 250lm/ft. Finish - Clear
Width - 5/16" (8mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: ELL4819W
Bulb Type - PAR20 Die-Cast Aluminum Finish - White/White
I.D. - 4" O.D. - 5 1/8"
For Use With PAR20 Bulbs Deep Round Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELL4817W
Bulb Type - PAR20 Die-Cast Aluminum Finish - White/White
I.D. - 4" O.D. - 5 1/8"
For Use With PAR20 Bulbs Deep Round Reflector Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL4817BZ
Bulb Type - PAR20 Die-Cast Aluminum Finish - Bronze/Bronze
I.D. - 4" O.D. - 5 1/8"
For Use With PAR20 Bulbs Deep Round Reflector Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL4813BZ
Bulb Type - PAR20 Die-Cast Aluminum Finish - Bronze/Bronze
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELL4810BZ
Bulb Type - PAR20 Die-Cast Aluminum Finish - Bronze/Bronze
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Reflector Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL4810B
Bulb Type - PAR20 Die-Cast Aluminum Finish - Black/Black
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Reflector Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL4816W
Bulb Type - PAR20 Die-Cast Aluminum Finish - White/White
I.D. - 2 3/4" O.D. - 4 1/2"
For Use With PAR20 Bulbs Square Baffle/Recommended For New Construction Housings Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELL4814W
Bulb Type - PAR20 Die-Cast Aluminum Finish - White/White
I.D. - 2 3/4" O.D. - 4 1/2"
For Use With PAR20 Bulbs Square Reflector/Recommended For ELCO New Construction and Remodel Housings Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL4814B
Bulb Type - PAR20 Die-Cast Aluminum Finish - Black/Black
I.D. - 2 3/4" O.D. - 4 1/2"
For Use With PAR20 Bulbs Square Reflector/Recommended For ELCO New Construction or Remodel Housings Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL4814BZ
Bulb Type - PAR20 Die-Cast Aluminum Finish - Bronze/Bronze
I.D. - 2 3/4" O.D. - 4 1/2"
For Use With PAR20 Bulbs Square Reflector/Recommended For ELCO New Construction and Remodel Housings Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUL32-3
Lens for EUN Series/Replacement Lens For T5 Fluorescent Undercabinet Lights 32" Lens For EUN32E
Width - 3 1/2"
|
Part Number: EUBC24
Linking Connector For Lotus System ELCO LED Undercabinet Light Accessory 24" Linking Connector Finish - White
Length - 24"
|
Part Number: EL993B
Wattage - 50w Max Bulb Type - PAR20/R20/CFL Base - Medium Base (E26) PAR Type Finish - Black/White Trim
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 32W Max., CFL (PL-T) Phenolic Step/Metal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL993W
Wattage - 50w Max Bulb Type - PAR20/R20/CFL Base - Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 32W Max., CFL (PL-T) Phenolic Step/Metal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EW44-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 360lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: EW44-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 360lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EW44-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 360lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: ELM40BBZ
Wattage - 150W Max. Bulb Type - PAR38/R40 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Bronze Trim
Outer Diameter - 7 1/4"
6" Metal Stepped Baffle Trim.
|
Part Number: ELM530WOV
Wattage - 42W Max. CFL/75W Max. PAR30 or R30 Bulb Type - CFL/PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - White/White
5" Metal Stepped Baffle with Coil Springs Trim with Oversized Ring.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM530BOV
Wattage - 42W Max. CFL/75W Max. PAR30 or R30 Bulb Type - CFL/PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - Black/White Trim
5" Metal Stepped Baffle with Coil Springs Trim with Oversized Ring.
|
Part Number: ELST11B
Step Replacement Open Faceplate For ELST20 Finish - Black
Height - 5" Length - 9 1/2"
|
Part Number: ELST11BZ
Step Replacement Open Faceplate For ELST20 Finish - Bronze
Height - 5" Length - 9 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST11W
Step Replacement Open Faceplate For ELST20 Finish - White
Height - 5" Length - 9 1/2"
|
Part Number: RM1H
Oak System Trims Round - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Haze/White Ring
ELCO Accessories.
|
Part Number: RM1B
Oak System Trims Round - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Black/White Ring
ELCO Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RM11B
Oak System Trims Square - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Black/White Ring
ELCO Accessories.
|
Part Number: RM11H
Oak System Trims Square - For Use With E1L02 and E1L12 Used With Oak System Downlights Only Diecast Construction Finish - Haze/White Ring
ELCO Accessories.
|
Part Number: E44-24M
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Customizable CCT - Various Lumens - 165lm/ft. Finish - Clear/RGB
Width - 25/64" (10mm) Field Cuttable - Every 4 Inches
Available in Custom Cuts or 16ft. Rolls. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL19W
Wattage - 42W Max.60w Max. Bulb Type - CFL/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Shower Trim with Clear Lens.
|
Part Number: EL512W
Wattage - 60w Max. Bulb Type - A19 Compatible - 5" Line Voltage IC and Non-IC and Shallow Housings Base - Medium (E26) Finish - White
Outer Diameter - 6 1/4"
5" Shower Trim with Albalite Lens.
|
Part Number: EL994B
Wattage - 50w Max Bulb Type - PAR20/R20/R16/A19/CFL/LED Base - Medium Base (E26) PAR Type Finish - Black/White Trim
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20/40W Max., A19, R16/32W Max., CFL (PL-T) Stepped Phenolic Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E261-35W
Wattage - 2.2w
Voltage - 12v
Color Temp - 3500K Lumens - 170lm Finish - White
Diameter - 3" Depth - 1/4"
5 year limited factory warranty.
|
Part Number: E45-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 450lm/ft. Finish - Clear
Height - 25/64" (10mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E45-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 450lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E45-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 450lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: ELJ4S
Dimensions - 3 3/4" x 3 3/4" x 2 3/8" Finish - Red/Silver
Bulb Type: Compatible with LED Disk Lights, LED Sky Panels, and LED Ceiling Mount Fixtures
Maximum 2-Hour Fire Rated Ceiling Assembly IC Rated for Direct Contact with Insulation Height Adjustable Bracket Low Profile/Ideal for Shallow Ceiling Plenums
Trims and fixtures sold separately.
|
Part Number: EL993BZ
Wattage - 50w Max Bulb Type - PAR20/R20/CFL Base - Medium Base (E26) PAR Type Finish - Bronze/Bronze
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 32W Max., CFL (PL-T) Phenolic Step/Metal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL993N
Wattage - 50w Max Bulb Type - PAR20/R20/CFL Base - Medium Base (E26) PAR Type Finish - Nickel/Nickel
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 32W Max., CFL (PL-T) Phenolic Step/Metal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ERT415BB
Round Reflector Trim For 4" LED Round ELM Downlight ELCO Recessed Housing Accessories Finish - Black/Black
Trim Height - 1 1/4" Trim Inner Diameter - 3" Trim Outer Diameter - 4 1/2"
|
Part Number: ERT445W
Square Reflector Trim For 4" LED ELM System Downlight ELCO Recessed Housing Accessories Finish - White/White
Trim Height - 1 1/4" Trim Inner Diameter - 2 3/8" Trim Outer Diameter - 4 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL994W
Wattage - 50w Max Bulb Type - PAR20/R20/R16/A19/CFL/LED Base - Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20/40W Max., A19, R16/32W Max., CFL (PL-T) Stepped Phenolic Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL4812B
Bulb Type - PAR20 Die-Cast Aluminum Finish - Black/Black
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Wet Location/Steam Room Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: ELL6810W
Bulb Type - PAR (Not Included) Compatible - 6" IC and Non-IC Housings Finish - White/White
Height - 1 5/8" Inner Diameter - 6" Outer Diameter - 7 1/2"
Torsion springs securely mount trim into housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EFPC61
LED Flat Rope Light Accessories 6' Power Cord and Driver For EDF11 and EDF12 ELCO Flat Rope Light Accessory Finish - White
|
Part Number: EFPC62
LED Flat Rope Light Accessories 6' Power Cord and Driver For EDF21 ELCO Flat Rope Light Accessory Finish - White
|
Part Number: EL16SH
Wattage - 42W Max./13W/60w Max. Bulb Type - CFL/Quad/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 8"
6" Shower Trim with Drop Opal Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL530KCP
Wattage - 75W Max. Bulb Type - PAR30/R30 Compatible - 5" Line Voltage IC/Non-IC Base - Medium (E26) Finish - Copper/Copper
Outer Diameter - 6 1/4"
5" Open Trim with Socket Bracket.
|
Part Number: ELM30BBZ
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Bronze Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: EL513W
Wattage - 42W Max./60w Max. Bulb Type - CFL/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White
Outer Diameter - 6 1/4"
5" Shower Trim with Fresnel Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM30WBZ
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/Bronze Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: EL22BZ
Wattage - 42W Max.60w Max. Bulb Type - CFL/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - Bronze
Outer Diameter - 8"
6" Shower Trim with Frosted Lens.
|
Part Number: EL19B
Wattage - 42W Max.60w Max. Bulb Type - CFL/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - Black
Outer Diameter - 8"
6" Shower Trim with Clear Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUL42-3
Lens for EUN Series/Replacement Lens For T5 Fluorescent Undercabinet Lights 42" Lens For EUN42E
Width - 3 1/2"
|
Part Number: EL41527W
Dimmable/Triac/ELV
Wattage - 11w (60w equivalent) Voltage - 120v Lumens - 740lm Color Temp - 2700K Finish - White
Depth - 3 3/8" Diameter - 5 1/2"
5 year factory warranty (limited).
|
Part Number: EL12BZ
Wattage - 42W Max./60w Max. Bulb Type - 4 Pin CFL/A19/Par Type Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - Bronze
Outer Diameter - 8"
6" Shower Trim with Albalite Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL17B
Wattage - 75W Max. Bulb Type - PAR30/R30 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) PAR Type Finish - Black/White
Outer Diameter - 8"
6" Eyeball with Baffle Trim.
|
Part Number: EL490ICA
Dimmability/Based on Lamp
Wattage - 18w Voltage - 120/277v
Bulb Type - Designed for use with ELCO 4" LED Inserts, LED Modules, or PSA37 with 4" MR16 Trims
Length - 8.5"
Width - 6"
Height - 5.5"
5 year factory warranty (limited). CA JA8 Title 24 compliant.
|
Part Number: EL490RICA
Dimmability/Based on Lamp
Input Voltage - 120v
Output Voltage - 120v
Bulb Type - LED MODULES, 4" LED Inserts, or PSA37 with MR16 Trims
Length - 9 1/2"
Width - 4 3/4"
Height - 5 1/2"
3 year factory warranty (limited). Install a JA8-2016-E lamp/luminaire for Title 24 compliance.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL902W
Wattage - 75w Max Bulb Type - LED, PAR30, PAR Type Base - Medium Base (E26) Finish - White/White
O.D. - 5 1/16"
Lamp - 75W Max., PAR30, PAR Type Airtight Baffle Trim Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL901W
Wattage - 75w Max Bulb Type - LED, PAR30, PAR Type Base - Medium Base (E26) Finish - White/White
O.D. - 5 1/16"
Lamp - 75W Max., PAR30, PAR Type Airtight Baffle Trim Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL998W
Wattage - 50w Max Bulb Type - PAR20/PAR16/R20 Base Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 40W Max., R16 Adjustable Eyeball Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL993KBZ
Wattage - 50w Max Bulb Type - PAR20/A19/R16/R20 Base Medium Base (E26) PAR Type Finish - Bronze/Bronze
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 40W Max., A19/R16 Integral Socket Bracket/Controls Lamp Height Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL990W
Wattage - 50w Max Bulb Type - PAR20/R20 Base - Medium Base (E26) PAR Type Finish - Black/White Trim
I.D. - 2" O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20 Pinhole Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL990CP
Wattage - 50w Max Bulb Type - PAR20/R20 Base - Medium Base (E26) PAR Type Finish - Copper/copper
I.D. - 2" O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20 Pinhole Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL912B
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Black/Black
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL912SH
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - White/White Lexan
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL570RICA
Dimmability/Based on Lamp
Wattage - 17w Voltage - 120v
Bulb Type: Designed for use with ELCO 5" LED Inserts, LED Modules, or PSA37 with 5" MR16 Trims
Single Wall/IC Airtight/Remodel Steel Housing/Stamped Galvanized Steel Frame
5 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL560ICA
Dimmability/Based on Lamp
Wattage - 17w Max. Voltage - 120v
Bulb Type: Designed for use with ELCO 5" LED Inserts, LED Modules, or PSA37 with 5" MR16 Trims
Shallow/Single Wall/IC Airtight Maximum Hole Cutout 5 1/2"
5 year limited factory warranty.
|
Part Number: EL455CT5W
Dimmable/Triac/ELV
Wattage - 9w Voltage - 120v Lumens - 600lm Selectable CCT - 27/30/35/40/50K Finish - White/White
Height - 2 3/4" Outer Diameter - 5 1/2"
5 year limited factory warranty.
|
Part Number: ELM530KBZ
Wattage - 75W Max. PAR30 or R30 Bulb Type - PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - Bronze/Bronze
Outer Diameter - 6 1/4"
5" Metal Stepped Baffle with Socket Bracket Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUD32
Dimmable - With ELCO Dimmable Drivers
Wattage - Customizable Voltage - 24v
Customizable CCT - 27/30/40K Aluminum Channel Mount - Included Finish - Silver/Aluminum
Height - 9/16"
Inner Channel Width - 1/2" (12mm) Outer Channel Width - 11/16"
Available in custom cuts. CA Title 24 JA8 compliant.
|
Part Number: EUD33
Dimmable - With ELCO Dimmable Drivers
Wattage - Customizable Voltage - 24v
Customizable CCT - 27/30/40K Aluminum Channel Mount - Included Finish - Silver/Aluminum
Height - 3/8"
Inner Channel Width - 11/16" (17mm) Outer Channel Width - 13/16"
Available in custom cuts. CA Title 24 JA8 compliant.
|
Part Number: EUD34
Dimmable - With ELCO Dimmable Drivers
Wattage - Customizable Voltage - 24v
Customizable CCT - 27/30/40K Aluminum Channel Mount - Included Finish - Silver/Aluminum
Height - 5/8"
Inner Channel Width - 3/8" (9mm) Outer Channel Width - 5/8"
Available in custom cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUD35
Dimmable - With ELCO Dimmable Drivers
Wattage - Customizable Voltage - 24v
Customizable CCT - 27/30/40K Aluminum Channel Mount - Included Finish - Silver/Aluminum
Height - 3/8"
Inner Channel Width - 11/16" (17mm) Outer Top Channel Width - 7/8"
Available in custom cuts. CA Title 24 JA8 compliant.
|
Part Number: EUD36
Dimmable - With ELCO Dimmable Drivers
Wattage - Customizable Voltage - 24v
Customizable CCT - 27/30/40K Aluminum Channel Mount - Included Finish - Silver/Aluminum
Height - 1 3/16"
Inner Channel Width - 25/32" (19mm) Outer Base Channel Width - 1 3/16"
Available in custom cuts. CA Title 24 JA8 compliant.
|
Part Number: EL993CP
Wattage - 50w Max Bulb Type - PAR20/R20/CFL Base - Medium Base (E26) PAR Type Finish - Copper/Copper
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 32W Max., CFL (PL-T) Phenolic Step/Metal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL41535W
Dimmable/Triac/ELV
Wattage - 11w (60w equivalent) Voltage - 120v Lumens - 800lm Color Temp - 3500K Finish - White
Depth - 3 3/8" Diameter - 5 1/2"
5 year factory warranty (limited).
|
Part Number: EL41540W
Dimmable/Triac/ELV
Wattage - 11w (60w equivalent) Voltage - 120v Lumens - 830lm Color Temp - 4000K Finish - White
Depth - 3 3/8" Diameter - 5 1/2"
5 year factory warranty (limited).
|
Part Number: EL41550W
Dimmable/Triac/ELV
Wattage - 11w (60w equivalent) Voltage - 120v Lumens - 860lm Color Temp - 5000K Finish - White
Depth - 3 3/8" Diameter - 5 1/2"
5 year factory warranty (limited).
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM30WG
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/Gold Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: ELM30BG
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Gold Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: ELM530BZ
Wattage - 42W Max. CFL/75W Max. PAR30 or R30 Bulb Type - CFL/PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - Bronze/Bronze
Outer Diameter - 6 1/4"
5" Metal Stepped Baffle with Coil Springs Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E261-27W
Wattage - 2.2w
Voltage - 12v
Color Temp - 2700K Lumens - 170lm Finish - White
Diameter - 3" Depth - 1/4"
5 year limited factory warranty.
|
Part Number: E261W
Wattage - 2.2w
Voltage - 12v
Color Temp - 3000K Lumens - 170lm Finish - White
Diameter - 3" Depth - 1/4"
5 year limited factory warranty.
|
Part Number: E261B
Wattage - 2.2w
Voltage - 12v
Color Temp - 3000K Lumens - 170lm Finish - Black
Diameter - 3" Depth - 1/4"
5 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELL4812BZ
Bulb Type - PAR20 Die-Cast Aluminum Finish - Bronze/Bronze
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Wet Location/Steam Room Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: E36-24SD
Dimmable - With ELCO Dimmable Drivers
Wattage - 3.5w/ft. Voltage - 24v
Color Temp - SunsetK (1800-3000K) Lumens - 300lm/ft. Finish - Clear
Width - 3/8" (10mm) Field Cuttable - Every 2.5 Inches or Every 14 LED's
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E80-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 8.8w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 800lm/ft. Finish - Clear
Width - 35/64" (14mm) Field Cuttable - Every 1 Inch
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: E80-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 8.8w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 800lm/ft. Finish - Clear
Width - 35/64" (14mm) Field Cuttable - Every 1 Inch
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: E80-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 8.8w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 800lm/ft. Finish - Clear
Width - 35/64" (14mm) Field Cuttable - Every 1 Inch
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: ELL6813W
Bulb Type - PAR (Not Included) Compatible - 6" IC and Non-IC Housings Finish - White/White
Height - 1 5/8" Inner Diameter - 6" Outer Diameter - 7 1/2"
Torsion springs securely mount trim into housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM530BG
Wattage - 42W Max. CFL/75W Max. PAR30 or R30 Bulb Type - CFL/PAR30/R30 (Not Included) Compatible - 5" Line Voltage IC and Non-IC Versions Base - Medium (E26) Finish - Black/Gold Trim
Outer Diameter - 6 1/4"
5" Metal Stepped Baffle with Coil Springs Trim.
|
Part Number: RM3CP
3" Metal Trim Rings Bulb Type - MR16 LED/Non-LED Finish - Copper
I.D. - 3 1/8" O.D. - 4 5/16"
ELCO Accessories.
|
Part Number: EL993BB
Wattage - 50w Max Bulb Type - PAR20/R20/CFL Base - Medium Base (E26) PAR Type Finish - Black/Black
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 32W Max., CFL (PL-T) Phenolic Step/Metal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EW45-2427
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 2700K Lumens - 450lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: EW45-2430
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 3000K Lumens - 450lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
Part Number: EW45-2440
Dimmable - With ELCO Dimmable Drivers
Wattage - 4.4w/ft. Voltage - 24v
Color Temp - 4000K Lumens - 450lm/ft. Finish - Clear
Width - 25/64" (10mm) Field Cuttable - Every 2 Inches
Custom Cuts. CA Title 24 JA8 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM30BCP
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/Copper Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: ELM30WCP
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/Copper Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: EL19SH
Wattage - 42W Max.60w Max. Bulb Type - CFL/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 8"
6" Shower Trim with Clear Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL22W
Wattage - 42W Max.60w Max. Bulb Type - CFL/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Shower Trim with Frosted Lens.
|
Part Number: EL22SH
Wattage - 42W Max.60w Max. Bulb Type - CFL/A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 8"
6" Shower Trim with Frosted Lens.
|
Part Number: ELM45B
Wattage - 60W Max./75W Max. Bulb Type - A19/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 7 1/4"
Baffle helps reduce glare.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELM45W
Wattage - 60W Max./75W Max. Bulb Type - A19/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
Baffle helps reduce glare.
|
Part Number: EL522W
Wattage - 42W Max. CFL/60W Max. A19 Bulb Type - CFL/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White
Outer Diameter - 6 1/4"
5" Shower Trim with Frosted Lens.
|
Part Number: ERT411CT5W
Triac/ELV Dimmable
Wattage - 9w (50w equivalent)
Voltage - 120v Lumens - 500lm Selectable CCT - 27/30/35/40/50K Finish - White/White
Fixture Outer Diameter - 4 3/8" Fixture Height - 1"
CA JA8 Title 24 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL760ICA
Bulb Type - LED Voltage - 120v
Compatible Trims: ELCO 6" LED Inserts, LED Modules, or PSA37 with 6" MR16 Trims.
LED Light Engine Sold Separately Shallow Single Wall IC Rated
5 year factory warranty (limited).
|
Part Number: EL760RICA
Bulb Type - LED Voltage - 120v
Compatible Trims: ELCO 6" LED Inserts, LED Modules, or PSA37 with 6" MR16 Trims.
LED Light Engine Sold Separately Shallow Single Wall IC Rated
5 year factory warranty (limited).
|
Part Number: EL911B
Wattage - 30w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Black/Black
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Clear Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL911N
Wattage - 30w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Nickel/Nickel
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Clear Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL912G
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Gold/Gold
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL912N
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Nickel/Nickel
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL915W
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Pinhole Glass Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL2985W
Wattage - 50w Max Bulb Type - PAR20/LED Base - Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 7/8"
Lamp - 50W Max., PAR20 Square Trim with Gimbal Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EPSD22-120
Hardwire Connector 120" Indoor Tape Light Accessory Ambio System Finish - White
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL770ICA
Dimmability/Based on Lamp
Compatible with ELCO 6" LED Inserts. Single Wall. IC Rated
Input Voltage - 120v
Output Voltage - 120v
Bulb Type - LED Modules, LED Inserts, or PSA37 with 6" MR16 Trims
Length - 9 1/2"
Width - 7"
Height - 7"
5 year factory warranty (limited).
|
Part Number: EL492RICA
Wattage - 14w Voltage - 120v
Bulb Type: Designed for use with ELCO 4" LED Inserts, LED Modules, or PSA37 with 4" MR16 Trims
Length - 11"
Width - 4 1/4"
Height - 3 1/2"
3 year limited factory warranty. CA JA8 Title 24 compliant.
|
Part Number: EL492ICA
Dimmability/Based on Lamp
Wattage - 14w Voltage - 120v or 277v
Bulb Type: Designed for use with ELCO 4" LED Inserts, LED Modules, or PSA37 with 4" MR16 Trims
Length - 8 1/3"
Width - 5 1/8"
Height - 3 1/2"
5 year limited factory warranty. Install a CA JA8 Title 24 lamp/luminaire for compliance.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ERT412CT5W
Triac/ELV Dimmable
Wattage - 12w (50w equivalent)
Voltage - 120v Lumens - 700lm Selectable CCT - 27/30/35/40/50K Finish - White
Outer Diameter - 4 3/8" Depth - 1"
CA JA8 Title 24 compliant.
|
Part Number: ERT44130W
Triac/ELV Dimmable
Wattage - 9w (50w equivalent)
Voltage - 120v Lumens - 550lm Color Temp - 3000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 3"
CA JA8 Title 24 compliant.
|
Part Number: ERT44130N
Triac/ELV Dimmable
Wattage - 9w (50w equivalent)
Voltage - 120v Lumens - 550lm Color Temp - 3000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 3"
CA JA8 Title 24 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ERT44130BZ
Triac/ELV Dimmable
Wattage - 9w (50w equivalent)
Voltage - 120v Lumens - 550lm Color Temp - 3000K Finish - Bronze
Outer Diameter - 4 3/4" inner Diameter - 3"
CA JA8 Title 24 compliant.
|
Part Number: ERT44140W
Triac/ELV Dimmable
Wattage - 9w (50w equivalent)
Voltage - 120v Lumens - 600lm Color Temp - 4000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 3"
CA JA8 Title 24 compliant.
|
Part Number: ERT44140N
Triac/ELV Dimmable
Wattage - 9w (50w equivalent)
Voltage - 120v Lumens - 600lm Color Temp - 4000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 3"
CA JA8 Title 24 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ERT44140BZ
Triac/ELV Dimmable
Wattage - 9w (50w equivalent)
Voltage - 120v Lumens - 600lm Color Temp - 4000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 3"
CA JA8 Title 24 compliant.
|
Part Number: ERT66140BZ
Triac/ELV Dimmable
Wattage - 12w (70w equivalent)
Voltage - 120v Lumens - 800lm Color Temp - 4000K Rated Life - 50,000 hours Finish - Bronze
Outer Diameter - 6 5/8" Inner Diameter - 4 3/4"
CA JA8 Title 24 compliant.
|
Part Number: ERT66130W
Triac/ELV Dimmable
Wattage - 12w (70w equivalent)
Voltage - 120v Lumens - 750lm Color Temp - 3000K Rated Life - 50,000 hours Finish - White
Outer Diameter - 6 5/8" Inner Diameter - 4 3/4"
CA JA8 Title 24 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ERT66140W
Triac/ELV Dimmable
Wattage - 12w (70w equivalent)
Voltage - 120v Lumens - 800lm Color Temp - 4000K Rated Life - 50,000 hours Finish - White
Outer Diameter - 6 5/8" Inner Diameter - 4 3/4"
CA JA8 Title 24 compliant.
|
Part Number: ERT66140N
Triac/ELV Dimmable
Wattage - 12w (70w equivalent)
Voltage - 120v Lumens - 800lm Color Temp - 4000K Rated Life - 50,000 hours Finish - Nickel
Outer Diameter - 6 5/8" Inner Diameter - 4 3/4"
CA JA8 Title 24 compliant.
|
Part Number: EL415CT5W
Dimmable/Triac/ELV
Wattage - 12w (65w equivalent) Voltage - 120v Lumens - 850lm Selectable CCT - 27/30/35/40/50K Finish - White
Depth - 3 3/8" Diameter - 5 1/2"
5 year factory warranty (limited).
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL770RICA
Dimmability/Based on Lamp
Compatible with ELCO 6" LED Inserts. Single Wall. IC Rated
Input Voltage - 120v
Voltage - 120/277v Bulb Type - LED Modules, LED Inserts, or PSA37 with 6" MR16 Trims
Length - 14 1/4"
Width - 6 1/2"
Height - 7 1/2"
3 year factory warranty (limited).
|
Part Number: EL390RICA
Wattage - 14w Voltage - 120v
Compatible Trims: MR16 LED Lamps with PSA37 or 3" LED Inserts.
LED Light Engine Sold Separately Single Wall IC Rated Flicker Free LED Dimming
3 year factory warranty (limited).
|
Part Number: ELSF11CT5BZ
Triac/ELV/Dimmable
Wattage - 15w
Voltage - 120V Lumens - 900lm Selectable CCT - 27/30/35/40/50K Finish - Bronze/Bronze
Outer Diameter - 7 1/4" Height - 1 1/4"
CA Title 24 JA8-2016 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL995N
Wattage - 55w Max Bulb Type - PAR20/PAR16/R20 Base Medium Base (E26) PAR Type Finish - Nickel/Nickel
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 55W Max., PAR16 Adjustable Socket Bracket 25° to 30° Tilt Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL998B
Wattage - 50w Max Bulb Type - PAR20/PAR16/R20 Base Medium Base (E26) PAR Type Finish - Black/Black
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 40W Max., R16 Adjustable Eyeball Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL998SB
Wattage - 50w Max Bulb Type - PAR20/R20 Base Medium Base (E26) Finish - Black/Black
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20 Adjustable Eyeball with Special Clips and Socket Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL993KN
Wattage - 50w Max Bulb Type - PAR20/A19/R16/R20 Base Medium Base (E26) PAR Type Finish - Nickel/Nickel
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20, 40W Max., A19/R16 Integral Socket Bracket/Controls Lamp Height Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL999B
Wattage - 50w Max Bulb Type - PAR20/R20/CFL/A19/R16 Base - Medium Base (E26) PAR Type Finish - Black/White Trim
O.D. - 5"
Lamp - 50W Max., PAR20/R20, 40W Max. A19 or R16 Reflector Trim/32w Max. CFL (PL-T) Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL999C
Wattage - 50w Max Bulb Type - PAR20/R20/CFL/A19/R16 Base - Medium Base (E26) PAR Type Finish - Clear/White Trim
O.D. - 5"
Lamp - 50W Max., PAR20/R20, 40W Max. A19 or R16 Reflector Trim/32w Max. CFL (PL-T) Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL911BZ
Wattage - 30w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Bronze/Bronze
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Clear Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL913BZ
Wattage - 30w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Bronze/Bronze
O.D. - 4 3/4"
Lamp - 30W Max., R20/26W Max., CFL Shower Trim with Fresnel Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL913SH
Wattage - 30w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - White/White Lexan Ring
O.D. - 4 3/4"
Lamp - 30W Max., R20/26W Max., CFL Shower Trim with Fresnel Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL915BZ
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Bronze/Bronze
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Pinhole Glass Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL390ICA
Wattage - 14w Voltage - 120v
Compatible Trims: MR16 LED Lamps with PSA37 or 3" LED Inserts.
LED Insert/Modules/Lamps Sold Separately Single Wall IC Airtight Flicker Free LED Dimming
3 year limited factory warranty. Install a JA8 2016-E Lamp for CA Title 24 compliance.
|
Part Number: EL410CT5W
Dimmable/Triac/ELV
Wattage - 12w Voltage - 120v Lumens - 840lm Selectable CCT - 27/30/35/40/50K Finish - White/White
Height - 3 3/8" Outer Diameter - 5 1/2"
5 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL44127W
Dimmable/Triac/ELV
Wattage - 10w Voltage - 120v Lumens - 700lm Color Temp - 2700K Finish - White/White
Height - 2 1/2" Diameter - 5"
5 year limited factory warranty.
|
Part Number: ERT445BB
Square Reflector Trim For 4" LED ELM System Downlight ELCO Recessed Housing Accessories Finish - Black/Black
Trim Height - 1 1/4" Trim Inner Diameter - 2 3/8" Trim Outer Diameter - 4 1/2"
|
Part Number: EL7ICA
Wattage - 90w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 90W and Line Voltage PAR Trims.
Airtight IC Universal Housing For Direct Contact Internal Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL7ICANB
Wattage - 90w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 90W and Line Voltage PAR Trims.
Airtight IC Universal Housing For Direct Contact Internal Thermal Protector Aluminum Housing/Stamped Galvanized Steel Frame
3 year limited factory warranty.
|
Part Number: EL7RICA
Wattage - 90w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 90W and Line Voltage PAR Trims.
Airtight IC Remodel Housing For Direct Contact Internal Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
Part Number: R9ICA
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps and 6" Line Voltage PAR Trims.
Airtight IC Shallow Housing For Direct Contact Internal Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: RR9ICA
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps and 6" Line Voltage PAR Trims.
Airtight IC Shallow Remodel Housing For Direct Contact Internal Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
Part Number: EL7ICA-G24
Wattage - 27w Max. Voltage - 120v
Bulb Type - For use with LED Retrofit or 27W Max. Self Ballasted 120V CFL Lamp (GU24 Base) Lamps.
Airtight IC Housing For Insulated Ceilings Compatible with ELCO 6" Line Voltage PAR Trims Adjustable Socket Bracket Included
3 year limited factory warranty.
|
Part Number: EL5ICA
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 75W and Line Voltage PAR Trims.
Airtight IC Universal Housing For Direct Contact Internal Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL5ICANB
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 75W and Line Voltage PAR Trims.
Airtight IC Universal Housing For Direct Contact Internal Thermal Protector Maximum Hole Cutout is 5 1/2"
3 year limited factory warranty.
|
Part Number: EL5RICA
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 75W.
Airtight IC Remodel Housing For Direct Contact Internal Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
Part Number: EL5RICANB
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 75W.
Airtight IC Remodel Housing For Direct Contact Internal Thermal Protector Maximum Hole Cutout 5 1/2"
3 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL10W
Wattage - (2) 42W PAR Bulb Type - (2) 42W PAR (Not Included) Base - Medium (E26) Lens - Prismatic Glass Finish - White
Outer Diameter - 9 3/8"
White Square Trim.
|
Part Number: EL516W
Wattage - 42W Max. CFL/60W Max. A19 Bulb Type - CFL/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 6 1/4"
5" Shower Trim with Drop Opal Lens.
|
Part Number: EL516SH
Wattage - 42W Max. CFL/60W Max. A19 Bulb Type - CFL/A19 Compatible - 5" Line Voltage IC and Non-IC Housings Base - Medium (E26) Finish - White Lexan
Outer Diameter - 6 1/4"
5" Shower Trim with Drop Opal Lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8530B
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8530BZ
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8530CP
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8530N
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8530W
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8540W
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8540N
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8540CP
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8540BZ
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8540B
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8740B
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8740BZ
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8740CP
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8740N
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8740W
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8730W
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8730N
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8730CP
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8730BZ
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8730B
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8430B
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8430BZ
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8430CP
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8430N
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8430W
Wattage - 3w Voltage - 12v Color Temp - 3000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8440W
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8440N
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8440CP
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8440BZ
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
Part Number: ELST8440B
Wattage - 3w Voltage - 12v Color Temp - 4000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Input of 12V requires an external transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8640B
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8640BZ
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8640CP
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8640N
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8640W
Wattage - 3w Voltage - 120v Color Temp - 4000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8630W
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - White
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8630N
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Nickel
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8630CP
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Copper
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: ELST8630BZ
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Bronze
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELST8630B
Wattage - 3w Voltage - 120v Color Temp - 3000K Finish - Black
Outer Diameter - 4 3/4" Inner Diameter - 2 1/8" Depth - 1 6/16"
Integrated LED board and driver.
|
Part Number: E1LF1-M2 New Construction Multiple Frame for ELCO Oak Recessed!
New construction Multiple Frame for Downlights For Row Mounting Fixtures - Set of Two (2) For E1L02 and E1L12 Requires Transformer IC Rated with E1L02 and E1L12
|
Part Number: E1LF2-M2 New Construction Multiple Frame for ELCO Oak Recessed!
New construction Multiple Frame for Oak series adjustable For Row Mounting Fixtures - Set of Two (2) For E1L32 and E1L22 Requires Transformer IC Rated with E1L32 and E1L22
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EUS24W
Wattage - 24w
Voltage - 120v
Bulb Type - One (1) T5 Fluorescent Included Finish - White
Length - 37 1/4"
5ft power cord and plug included.
|
Part Number: PSA37
Dimmable
Wattage - 7w Voltage 120v Color Temp - 3000k Lumens - 500lm Bulb Type - LED MR16 Base - Quick Connect
1 year limited factory warranty.
|
Part Number: PSA37-27
Dimmable
Wattage - 7w Voltage 120v Color Temp - 2700K Lumens - 500lm Bulb Type - LED MR16 Base - Quick Connect
1 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: PSA37-35
Dimmable
Wattage - 7w Voltage 120v Color Temp - 3500K Lumens - 500lm Bulb Type - LED MR16 Base - Quick Connect
1 year limited factory warranty.
|
Part Number: PSA37-40
Dimmable
Wattage - 7w Voltage 120v Color Temp - 4000K Lumens - 500lm Bulb Type - LED MR16 Base - Quick Connect
1 year limited factory warranty.
|
Part Number: EL7RICA-G24
Wattage - 27w Max. Voltage - 120v
Bulb Type - For use with LED Retrofit or 27W Max. Self Ballasted 120V CFL Lamp (GU24 Base) Lamps.
Airtight Remodel Housing For Insulated Ceilings Compatible with ELCO 6" Line Voltage PAR Trims Adjustable Socket Bracket Included
3 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELS30B
Wattage - 42W Max./75W Max. Bulb Type - CFL/PAR30 or R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 7 1/4"
Clips securely mount trim into housing.
|
Part Number: ELS30C
Wattage - 42W Max./75W Max. Bulb Type - CFL/PAR30 or R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Chrome/White Trim
Outer Diameter - 7 1/4"
Clips securely mount trim into housing.
|
Part Number: ELS30W
Wattage - 42W Max./75W Max. Bulb Type - CFL/PAR30 or R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 7 1/4"
Clips securely mount trim into housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELL4815W
Bulb Type - PAR20 Die-Cast Aluminum Finish - White/White
I.D. - 3 5/8" O.D. - 5"
For Use With PAR20 Bulbs Round Wall Wash Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: E1LF1-M3 New Construction Multiple Frame for ELCO Oak Recessed!
New construction Multiple Frame for Downlights For Row Mounting Fixtures - Set of Three (3) For E1L02 and E1L12 Requires Transformer IC Rated with E1L02 and E1L12
|
Part Number: EL992W
Wattage - 50w Max Bulb Type - PAR20/R20/R16/A19/LED Base - Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 50W Max., PAR20/R20/40W Max., A19, R16 Wall Wash Baffle Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL313SH
Wattage - 60w Max. Bulb Type - A19/Par Type Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 8"
IC Shower Trim with Lexan Ring for Snap-In Socket.
|
Part Number: EL12KW
Wattage - 42W Max./60w Max. Bulb Type - 4 Pin CFL/A19/Par Type Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White
Outer Diameter - 8"
6" Shower Trim with Albalite Lens.
|
Part Number: EL316SH
Wattage - 60W Max. Bulb Type - A19 Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 8"
IC Shower Trim with Lexan Ring for Snap-In Socket.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: ELA99SB
Wattage - 42W Max. CFL/100W Max. A19/150W Max. A21 Bulb Type - CFL/A19/A21 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Black/White Trim
Outer Diameter - 7 1/4"
6" Cone Reflector.
|
Part Number: ELM30NW
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Nickel/White Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
Part Number: ELM30NB
Wattage - 75W Max. Bulb Type - PAR30/R30 (Not Included) Compatible - 6" Integrated LED Housings Base - Medium (E26) Finish - Nickel/Black Trim
Outer Diameter - 7 1/4"
6" Metal Step Baffle Trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL317W
Wattage - 75W Max. Bulb Type - PAR30 (not included) Compatible - 6" Integrated Line Voltage Housings Base - Medium (E26) Finish - White/White
Outer Diameter - 8"
6" Gimbal Ring Trim with PSA27 Adapter.
|
Part Number: EL985W
Wattage - 50w Max Bulb Type - PAR20 Base Medium Base (E26) PAR Type Finish - White/White
O.D. - 4 3/4"
Lamp - 50W Max., PAR20 Adjustable Gimbal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
Part Number: EL985B
Wattage - 50w Max Bulb Type - PAR20 Base Medium Base (E26) PAR Type Finish - Black/Black
O.D. - 4 3/4"
Lamp - 50W Max., PAR20 Adjustable Gimbal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL985BZ
Wattage - 50w Max Bulb Type - PAR20 Base Medium Base (E26) PAR Type Finish - Bronze/Bronze
O.D. - 4 3/4"
Lamp - 50W Max., PAR20 Adjustable Gimbal Ring Compatible with 4" Line Voltage IC and Non-IC Versions
|
Pert Number: EL99LDICA
Wattage - 12w Max. Voltage - 120v Bulb Type - Medium Base (E26) LED PAR/R Lamps Base Type - Medium Base (E26) Finish - Black/Silver
Compatible With - ELCO 4" Line Voltage PAR/R trims
IC Airtight Housing For LED Lamps Only Thermally Protected Against Improper Lamping
Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance.
|
Part Number: EL55ICA
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 75W and Line Voltage PAR Trims.
Airtight IC Shallow Housing For Direct Contact Integral Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
|
|
|
|
|
|
|
|
|
|
Part Number: EL55RICA
Wattage - 75w Voltage - 120v
Bulb Type - Designed for use with Medium Base (E26) PAR Lamps up to 75W and Line Voltage PAR Trims.
Airtight IC Shallow Remodel Housing For Direct Contact Integral Thermal Protector Adjustable Socket Bracket Included
3 year limited factory warranty.
|
Part Number: EL912BZ
Wattage - 32w Max Bulb Type - R20/CFL Base - Medium Base (E26) PAR Type Finish - Bronze/Bronze
O.D. - 4 3/4"
Lamp - 30W Max., R20/32W Max., CFL Shower Trim with Frosted Lens Compatible with 4" Line Voltage IC and Non-IC Versions
|
|