6" Sloped IC Remodel Housing

Part Number: US-306-R-ICAT- Thermally Protected IC Remodel housing.- The socket bracket is specially designed to swivel and rotate so the lamp could be aligned properly. The lamp will aim straight down regardless of the ceiling pitch.- Adjustable socket bracket with a slope indicator provides consistent lamp alignment and setup. - Unit slips through 6-1/2” ceiling opening.- Four Preinstalled spring clips which secure the housing firmly into ceiling and accommodate different ceiling thicknesses from 1/2” to 1-3/8”.- Wire through junction box.- Can be installed from below the ceiling.- Dependable, favorable design and effortless installation.- 7-1/2” height allows use in 2”x 8” joist construction.- Preinstalled socket cap provides electrical contact protection against dust, paint and over spray.Options-Air shut gasket to prevent air flow from heated or air conditioned spaces.-Meets all national air flow requirements.ETL and C-ETL listed- ETL and C-ETL listedListed- For Damp location- For Feed-through wiring- For Direct contact with insulation

Item Type: Recessed HousingItem Style: Remodel, SlopedManufacturer: USA Light & ElectricWarranty: 1-year LimitedBulb Included: NoneCompatible Bulbs: Any standard medium based lamp - Halogen, LED or CFL. Voltage Type: 120 VoltInput Voltage: 120Output Voltage: 120Max. Watts: 75Features: IC Rated, Thermally ProtectedMaterial: AluminumConstruction Type: RemodelDimmable: YesAdjustable Pitch Ranges from 2/12 to 6/12Bar Hangers: 12" - 24" joist spanKnockouts: 4 x 1/2", 4 x RomexApproval Type: UL, UL - Damp location, UL - Feed-through wiringRecessed Size: 6 InchLength: 15" (381mm)Height: 7.5" (190.5mm)Width: 6.5" (168mm)