|
|
|
|
Part Number : 99610 Description Part Number - CDL4FR10/927/RTJB/LED
Wattage : 65w Equivalent
NO HOUSING REQUIRED - WIRE DIRECT TO THE FIXTURE!
HALCO - ProLED® Commerical Downlight Retrofits are a long life and
energy efficient replacement for traditional lamps. The 4" LED
Commercial Downlight Retrofit features an integrated junction
box for quick and easy installation into existing housings or
directly mount to drywall or ceiling tiles. It is dimmable, easy to
install and delivers a maintenance-free experience with a 50,000-
hour useful rated life. With its superior LED technology and
performance, the ProLED Commercial Downlight Retrofits deliver
consistent color, uniform illumination, and long life for your
lighting design. Applications include: office, hallway, bathroom,
lobby, hospitality, conference room. ProLED Commercial
Downlight Retrofits are backed by a 5-year limited warranty.
Bulb Type - 4" Recessed LED
Lumens - 700lm CRI - 90 Voltage - 120/277 Beam Spread - 950°
Outer Diameter: 5" Height: 4"
Insulation Compliant (IC) CA Title 20 Compliant
- COMPATIBLE DIMMERS
- Although this product is compatible with most common residential type dimmers, performance depends on dimmer, dimmer
- setting, wiring method, and the number of LED modules.
- Recommended Dimmers: Lutron SCL-153P, SCL-153PH, LGCL-153P,
- LGCL-153PLH, DVCL-153PR and TGCL-153PH
- .
Dimmable range from 5% to 100%. When there is a mismatch between the - dimmer and the LED, which makes the LED stroboscopic, then slide the adjustment dial on the side of the dimmer to adjust
- until the LED stops blinking.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- • 65 watt equivalent bulb for 10 watts
• No glare • Safe for the environment • Projects no heat into a room • 5-Year product warranty • Estimated yearly energy cost: $1.05 based on 4 hrs/day, $0.11/kWh
ADDITIONAL INFORMATION • Dimming range from 5% to 100% • Risk of fire or electrical shock. Disconnect power at fuse or circuit breaker before inspection, installation or removal. • Do not open. No user serviceable parts inside. Warranty void if opened. • Installation should be performed only by a qualified electrician in accordance with the National Electrical Code and relevant local code. • This recessed luminaire is intended for mounting only in a covered ceiling where only the lighted side of the luminaire is exposed. • Not all existing recessed housings will be compatible with this product. To ensure compatibility a test installation should be conducted. • Suitable for damp locations. Not for use where directly exposed to the weather or water. • To prevent injury or property damage, only use in fixtures that can structurally support a lamp weighing 0.90lb. • Not intended for use with emergency exit fixtures or emergency exit lights. • To prevent early failure, lamp should be installed in an operating environment ranging from -4 degrees F/-20 degrees C and +95 degrees F/+35 degrees C • Use only on 120/277VAC-60Hz circuits
|
|
|
|
|
|
|