 |
 |
 |
 |
|
 |
|
Features
Construction
▪ Single Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions.
▪ Housing accommodates up to 1 1/2" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts.
▪ Four (4) Pry-out knockout slots for easy Romex installation.
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Driver is rated for 120V and 277V input (120/277V). High efficiency driver with a power factor >0.9. Can be specified with Lutron Drivers for specific applications. Optional 90 Minute 120/277V emergency backup.
Dimmability
▪ 3-in-1 dimming. Triac, ELV and 0-10V dimming in one driver. 0-10V dimming down to 1% with compatible dimmer. Flicker-Free Dimming. Can be specified with Lutron drivers for specific applications.
Compatible Trims
▪ Compatible with - ELCO 4" LED Recessed Housing Trims.
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims.
▪ UL Listed for Feed Through. Meets California Title 24 JA8 Requirements.
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
