Home > Recessed Lighting > Four Inch Recessed Lighting >

ELCO EL99LDICA - 4" E26 Base ICA New Construction Housing - For LED Lamps Only - 12W Max. - 120V - Black/Silver

ELCO EL99LDICA
CUSTOMER REVIEWS

  


Download the Spec Sheet
Price: $15.33


Free Shipping
Qty:

Description Technical Specs Shipping Time
 
Part Number: EL99LDICA

Wattage - 12w Max.
Voltage - 120V
Base Type - Medium Screw (E26)
Bulb Type - Medium Base (E26) PAR/R lamps up to 12W
Finish - Black/Silver

  • 4" Line Voltage IC Airtight Housing, For LED Lamps Only!
  • Thermally protected against improper lamping
  • Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
  • 3 year limited factory warranty
  • UL Listed For Damp Locations
  • UL Listed For Feed Through
  • UL Listed for Direct Contact with Insulation (Type IC)
  • Airtight Per ASTM E-283
  • Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance
Features

    • Construction
      ▪ UL Listed for Direct Contact with Insulation (Type IC). Maximum hole cutout is 4 1/4". For LED Lamps Only!
      ▪ Housing accommodates up to 1 1/2" ceiling thickness. Suitable for T-grid and drop ceiling applications.
      ▪ Aluminum housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. Stamped galvanized steel frame
      ▪ Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists.

      Junction Box
      ▪ Positioned to accommodate straight conduit runs.
      ▪ Seven (7) 1/2" trade size pry-out conduit knockouts.
      ▪ Four (4) Romex pry-outs with strain relief.

      Hanger Bars / New Construction
      ▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams.
      ▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.

      Electrical
      ▪ Input Voltage: 120VAC. Thermally protected against improper lamping.

      Compatible Trims
      ▪ Compatible with ELCO 4" Line Voltage PAR/R Trims. Designed for use with Medium Base (E26) PAR/R Lamps up to 12W.

      Listing
      ▪ UL Listed for Damp Locations, UL Listed for Feed Through.
      ▪ Airtight per ASTM E-283, Install a JA8-2016-E Lamp for Title 24 Compliance.
      ▪ UL Listed for Direct Contact with Insulation (Type IC).

Share your knowledge of this product. Be the first to write a review »