 |
 |
 |
|
Part Number: EL8SQICA
Trims: ELCO 8" LED Insert/Medium Base (E26) A19/PAR Lamps Up To 75W. Sold Separately!
Wattage - 75W Max.
Voltage - 120v
Height - 7 1/4"
Length - 12 5/8"
Width - 9"
- Square Housing, Type IC, Airtight (with lensed trims)
- Double Wall Aluminum Construction, Integral Thermal Protector
- Supplied with captive bar hangers for 24" max. joist spacing
- Designed for ceiling plenums where 2x8 joists or taller are used
- Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
- 3 year limited factory warranty
- UL Listed for Damp Locations, Airtight Per ASTM E-283
- UL Listed for Feed Through, UL Listed For Direct Contact with Insulation and Combustible Materials
- Install a JA8 Lamp/Luminaire for CA Title 24 Compliance
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
| Material | -
| Aluminum Housing/Stamped Galvanized Steel Frame | -
-
-
- Construction Type
-
| -
| Square Housing, Type IC, Airtight (with lensed trims) | -
-
-
| Hanger Bars | -
- Spans Up To 24" And Can Be Repositioned 90°
-
| -
-
-
| Manufacturer | -
| ELCO Lighting | -
-
-
- Warranty
-
| -
| 3 Year Limited Factory Warranty | -
-
-
- Knockouts
-
| -
| Seven (7) 1/2" Trade Size Conduit Pry-Out Knockouts, Four (4) Romex Pry-Outs With Strain Relief | -
-
-
- Approval Type
-
| -
| UL - Damp Locations, UL Listed - Feed Through wiring, UL Listed For Direct Contact, Airtight Per ASTM E-283, Install a JA8 Lamp/Luminaire For CA Title 24 Compliance | -
-
-
- Recessed Size
-
| -
8"-
| -
-
-
| Bulb Type | ELCO 8" LED Inserts/Medium Base (E26) Par Lamps Up To 75W/120V 75W Max A19 | -
-
-
- Voltage Rating
-
| -
| 120V | -
-
-
| Wattage | -
| 75W Max. | -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction/Installation
▪ IC Rated for direct contact with insulation, for use with IC and Non-IC conditions.
▪ Suitable for T-grid and drop ceiling applications. Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
▪ Airtight housing with lensed trims to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for shallow ceiling plenums where 2x8 joists or taller are used. Aluminum Housing, stamped galvanized steel frame.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit pry-out knockouts.
▪ Four (4) Romex pry-outs with strain relief.
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-Bars slots for easy installation in T-bars.
▪ Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Driver is rated for 120V AC. Thermally protected against improper lamping.
Compatible Trims
▪ For use in insulated ceilings with ELCO 8" LED Inserts, Medium Base (E26) PAR Lamps up to 75W, 120V 75W Max A19. ELCO Suggested Trims: EL10W, EL881CT5W, EL11W, EL15W, EL88130W.
Listing
▪ UL Listed for Damp Locations, Listed for Feed Through
▪ Airtight Per ASTM E-283. Install a JA8 Lamp/Luminaire for CA Title 24 Compliance.
▪ Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
