 |
 |
 |
 |
|
 |
|
Features
Bulb Type: Medium Base (E26) PAR Lamps!
Housing
▪ IC Rated for direct contact with insulation, for use in IC and Non-IC conditions. Integral T-Bar slots for easy installation in T-grids.
▪ Housing adjusts in frame to accommodate 1 1/4" ceiling thickness, Aluminum housing for greater heat dissipation. Stamped Galvanized steel frame.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. Maximum Hole Cut-out is 6 3/8".
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size pry-out conduit knockouts.
▪ Four (4) Romex pry-outs with strain relief.
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitates easy installation in regular lumber, engineered lumber, and laminated beams.
▪ Spans up to 24° and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with the joists.
Installation
▪ Designed for ceiling plenums where 2x8 joists or taller are used. High strength hanger bars can be easily nailed to joists. Suitable for T-grid and drop ceiling applications.
Electrical
▪ Input Voltage: 120V AC. Thermally protected against improper lamping.
Trims/Lamp
▪ Compatible with ELCO 6" Line Voltage PAR Trims. Designed for use with Medium Base (E26) PAR lamps up to 90W. 90W rating is for the combination of housing and trim model ELM300.
Listing
▪ UL Listed for Damp Location. UL Listed for Feed Through.
▪ Airtight per ASTM E-283. Install a JA8 2016-E lamp/luminaire for Title 24 compliance.
▪ UL Listed for Direct Contact with Insulation and Combustible material.
|
|
|
|
|
|
|
