 |
Part Number: EL770RICA
Compatible with ELCO 6" LED Inserts.
Bulb Type: LED Modules, LED Inserts, or PSA37 with 6" MR16 Trims
Housing
▪ Steel housing for greater heat dissipation. Stamped galvanized steel frame
▪ Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness; Airtight housing with gasket to restrict airflow in accordance with ASTM-283 air-tight requirements
Junction Box
▪ Positioned to accommodate straight conduit runs
▪ Contains seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pryout slots
▪ Four Romex pryouts with strain relief
Remodel
▪ Designed for ceiling plenums where 2x8 joists or taller are used. Maximum hole cutout is 6 1/2".
▪ Suitable for T-grid and drop ceiling applications
Electrical
▪ Input Voltage: 120VAC; Inherently protected
Dimmability/Compatibility
▪ Dimmability based on lamp; Designed for use with ELCO 6" LED Inserts, LED Modules, or PSA37 with 6" MR16 trims: Trims and Inserts Sold Separately!
Listing
▪ UL Listed for Damp location, UL Listed for Wet Location with select trims, UL Listed for Feed Through
▪ Install a JA8-2016-E lamp/Luminaire for California Title 24 Compliance, ENERGY STAR Certified
▪ UL Listed for Direct Contact with Insulation and Combustible Materials, Airtight per ASTM E-283
   
| Tech Specs |
|---|
|
| | | Item Type | Dedicated IC Airtight Housing | | Construction Type | Remodel | | Manufacturer | ELCO | | Warranty | 3 Year Factory Warranty (Limited) | | Material | Steel Housing/Stamped Galvanized Steel Frame | | Wattage | 24 Watts | | Voltage | 120/277V | | UL Listed | Damp Location/Wet Location with Select Trims | | Dimmable | Yes/Based on Lamp | | Knockouts | (7) Seven 1/2" Trade Size Conduit, (4) Four 3/4", Pryout Slots, (4) Romex Pryouts with Strain Relief | | Fireproof | Yes with ELCO Fire Resistant Accessories: Sold Separately | | Height | 7 1/2" | | Width | 6 1/2" | | Length | 14 1/4" | | Recessed Size | 6" Inch |
|
|
|
