 |
Part Number: EL770ICDXA
Compatible with ELCO 6" LED 0-10V LED Inserts.
Bulb Type: Designed for use with ELCO 6" PLY LED Inserts
Height - 7 1/2"
Housing:
▪ Steel housing for greater heat dissipation. Stamped galvanized steel frame. Designed for ceiling plenums where 2x6 joists or taller are used.
▪ Single wall IC Airtight rated for direct contact with insulation, for use in IC or non-IC conditions
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness; Airtight housing with gasket to restrict airflow in accordance with ASTM-283 air-tight requirements
Junction Box:
▪ Positioned to accommodate straight conduit runs
▪ Contains Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" Knockouts, and four (4) Romex pry-outs with strain relief.
Hanger Bars / New Construction:
▪ Pre-installed hanger bars with TrueNail Facilitate easy installation in regular lumber, engineered lumber, and laminated beams
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction.
Installation / New Construction:
▪ Integral leveling flange allows for single-person installation while aligning the housings with the joists; Maximum hole cutout is 6 1/4". Suitable for T-grid and drop ceiling applications
Electrical:
▪ Input Voltage: 120/277V; Inherently protected. Fixture rated for 24W MAX LED insert.
Dimmability/Compatibility:
▪ Dimmability based on insert used! See Ply System LED Inserts: Trims and Inserts Sold Separately!
Listings/Warranty:
▪ UL Listed for Damp location, UL Listed for Wet Location with select trims, UL Listed for Feed Through
▪ Install a JA8-2016-E lamp for California Title 24 Compliance, 5 Year Limited Factory Warranty
▪ UL Listed for Direct Contact with Insulation and Combustible Materials, Airtight per ASTM E-283
  
| Tech Specs |
|---|
|
| | | Item Type | Dedicated IC Airtight Housing | | Construction Type | New Construction | | Manufacturer | ELCO | | Warranty | 5 Year Factory Warranty (Limited) | | Material | Steel Housing/Stamped Galvanized Steel Frame | | Wattage | 24 Watts Max | | Voltage | 120/277V | | UL Listed | Damp Location, Wet Location with Select Trims | | Dimmable | Yes/Wired For 0-10V | | Knockouts | (7) Seven 1/2" Trade Size Conduit, (4) Four 3/4", Pry-out Slots, (4) Four Romex Pry-outs/W Strain relief | | Fireproof/Battery Backup | NO/NO | | Height | 7 1/2" | | Compatible Trims | ELCO 6" Ply System LED Inserts | | Bulb Type | ELCO 6" Ply System LED Inserts | | Recessed Size | 6" Inch |
|
|
|
