 |
 |
 |
 |
|
 |
|
Features
- Construction:
-
- Shallow Single Wall IC Rated for direct contact with insulation. For use in IC and Non-IC Rated conditions.
-
- Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Suitable for T-grid and drop ceiling applications
-
- Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
Installation:
Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can be easily nailed to joists. Pre Installed hanger bars with True Nail easy installation in regular lumber, engineered lumber, and laminated beams. Maximum hole cutout is 6 1/4". Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while easily aligning the housings with the joists.
Junction Box:
Positioned to accommodate straight conduit runs. Two (2) 3/4" knockouts, Seven (7) 1/2" Trade size conduit knockouts. One (1) 3/8" knockout, Four (4) Pry-out knockout slots for easy Romex installation.
Electrical:
Input Voltage: 120/277V, Inherently Protected. Fixture rated for 24W Max LED Insert. Dimmability based on insert used. See Ply System LED Inserts. Compatible with ELCO 6" 0-10V LED Inserts. Includes Emergency Battery Backup.
Compatible Lamps:
Designed for use with ELCO 6" 0-10V LED Inserts
Listings:
UL Listed for Damp Locations, UL Listed for Wet Locations with select trims UL Listed for direct contact with Insulation and Combustible Material UL Listed for Feed Through, JA8-2016-E Title 24 Compliant, Meets restricted air flow requirements (per ASTM E-283)
|
|
|
|
|
|
|
