 |
 |
 |
|
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
| Step-Down Transformer | -
| YES/277 Volts To 120 Volts | -
-
-
- Construction Type
-
| -
| Shallow Airtight-New Construction | -
-
-
| Hanger Bars | -
- Spans Up To 24" And Can Be Repositioned 90°
-
| -
-
-
| Dimmability | -
| Based on Lamp | -
-
-
- Warranty
-
| -
- 5 Year Factory Warranty (limited)
-
| -
-
-
- Knockouts
-
| -
| Seven (7) 1/2" Trade Size Conduit Knockouts, Four (4) 3/4" Knockouts, Pry-out Knockout Slots, Four (4) Romex Pry-Outs With Strain Relief | -
-
-
- Approval Type
-
| -
| UL - Damp Locations, UL - Wet location (with Select Trims), UL Listed - Feed Through wiring, Meets CA Title 24 Requirements, Energy Star Certified | -
-
-
- Recessed Size
-
| -
6"-
| -
-
-
| Bulb Type | LED | -
-
-
- Voltage Rating
-
| -
| 277 Volts | -
-
-
- Dimensions
-
| -
- See Illustrations/See Spec Sheet
-
| -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction/Installation
▪ Shallow Single Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions.
▪ Housing accommodates up to 1 1/4" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for ceiling plenums where 2x6 joists or taller are used. Maximum Hole cutout is 6 1/4".
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts, Pry-out knockout slots.
▪ Four (4) Romex pry-outs with strain relief. See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Input Voltage: 120VAC. Inherently Protected.
Dimmability
▪ Based on lamp
Compatible Trims
▪ Compatible with - Designed for use with ELCO 6" LED Inserts, LED Modules, or PSA37 with 6" MR16 Trims.
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
▪ Airtight per ASTM E-283. Install a JA8-2016-E lamp for Title 24 compliance.
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
