 |
 |
 |
 |
|
 |
|
Features
Bulb Type: Designed for use with ELCO 5" LED Inserts, LED Modules, or PSA37 with 5" MR16 Trims
Housing
▪ Single wall IC rated for direct contact with insulation, for use with in IC or Non-IC conditions
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Aluminum Housing, stamped galvanized steel frame.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts with pry-out knockout slots
▪ 4 romex pry-outs with strain relief.
Hanger Bars / New Construction
▪ Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars
▪ Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists
Construction
▪ Designed for ceiling plenums where 2x8 joists or taller are used. Suitable for T-grid and drop ceiling applications. Maximum hole cutout is 5 1/2".
Electrical
▪ Input Voltage: 277V. Inherently Protected. With Step-Down Transformer.
Listing
▪ UL Listed for Direct Contact with Insulation and Combustible Materials
▪ Install a JA8 Lamp/Luminaire for CA Title 24 Compliance, UL Listed for Feed Through
▪ UL listed for Damp/Wet Location (with select trims), Air Tight per ASTM E-283
|
|
|
|
|
|
|
