 |
 |
 |
|
Part Number: EL560ICA
5" IC Airtight Shallow New Construction Housing for LED Inserts, 17W Max!
Wattage - 17w Max.
Voltage - 120V
Finish - Silver
Height - 5 1/2"
Width - 5 7/8"
Length - 8 3/4"
- Shallow Single Wall IC Construction, for use in insulated ceilings
- Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
- Compatible with ELCO 5" LED Inserts, LED Modules, or PSA37 with 5" MR16 Trims
- Trims and inserts sold separately
- Optional ELCO Accessories: Emergency Battery/Fire Resistance: Sold Separately!
- UL Listed for Damp locations/Wet Locations (with select trims), UL Listed for Feed Through
- UL Listed for Direct Contact with Insulation and Combustible Materials
- 5 year limited factory warranty
- Install a JA8 Lamp/Luminaire for CA Title 24 compliance (As High Efficiency Luminaire), Air Tight per ASTM E-283
  
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
| Item Description | -
| 5" IC Airtight Shallow New Construction Housing For LED Inserts | -
-
-
- Construction Type
-
| -
| Shallow/New Construction | -
-
-
- Bar Hangers
| -
- Up to 24" and can be repositioned 90°
| -
-
-
- Adjustable
-
| -
- In Frame up to 1 1/4" Ceiling Thickness
| -
-
-
- Knockouts
-
| -
| Seven (7) 1/2" trade size, Four (4) 3/4" Knockouts with Pry-Out knockout Slots, Four (4) Romex Pryouts With Strain Relief | -
-
-
| Wattage | -
| 17 Watts Max. | -
-
-
- Recessed Size
| -
5 Inch-
| -
-
-
- Voltage Rating
| -
| 120V | -
-
-
| Dimmability | -
| Based On Lamp Selection | -
-
-
| Compatibility | -
| ELCO 5" LED Inserts, LED Modules, or PSA37 with 5" MR16 Trims | -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Bulb Type: Designed for use with ELCO 5" LED Inserts, LED Modules, or PSA37 with 5" MR16 Trims
Housing
▪ Shallow Single wall IC rated for direct contact with insulation, for use with in IC or Non-IC conditions
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Aluminum Housing, stamped galvanized steel frame.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts with pry-out knockout slots
▪ 4 romex pry-outs with strain relief.
Hanger Bars / New Construction
▪ Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars
▪ Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Construction
▪ Designed for ceiling plenums where 2x8 joists or taller are used. Suitable for T-grid and drop ceiling applications. Maximum hole cutout is 5 1/2". Suitable for T-grid and drop ceiling applications.
Electrical
▪ Input Voltage: 120VAC. Inherently Protected. Dimmability: Based on Lamp Choice.
Listing
▪ UL Listed for Direct Contact with Insulation and Combustible Materials
▪ Install a JA8 Lamp/Luminaire for CA Title 24 Compliance, UL Listed for Feed Through
▪ UL listed for Damp/Wet Location (with select trims), Air Tight per ASTM E-283
|
|
|
|
|
|
|
