 |
 |
 |
|
Part Number: EL390ICA
3" New Construction Dedicated LED IC Airtight Housing.
Trims: ELCO 3" LED Inserts, LED Modules, or PSA37 with 3" MR16 Trims. Sold Separately!
Wattage - 14w
Voltage - 120v
Height - 5 1/2"
Length - 8 5/8"
Width - 5 7/8"
- Single Wall IC Airtight for use in insulated ceilings
- Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
- Flicker Free LED Dimming; Dimmability based on lamp
- Trims and inserts sold separately
- 3 year limited factory warranty
- UL Listed for Damp Locations/Wet Locations with select trims
- UL Listed for Direct Contact with insulation and Combustible materials
- UL Listed for Feed Through
- Airtight per ASTM E-283
- Install a JA8-2016-E lamp/luminaire for Title 24 compliance
  
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
| Material | -
| Steel Housing/Stamped Galvanized Steel Frame | -
-
-
- Construction Type
-
| -
- Airtight-New Construction
| -
-
-
| Hanger Bars | -
- Spans Up To 24" And Can Be Repositioned 90°
-
| -
-
-
| Voltage | -
| 120V | -
-
-
- Warranty
-
| -
| 3 Year Limited Factory Warranty | -
-
-
- Knockouts
-
| -
| Seven (7) 1/2" Trade Size Conduit Knockouts, Two (2) 3/4" Knockouts, One (1) 3/8" Knockout, Four (4) Pry-Out Knockouts Slots | -
-
-
- Approval Type
-
| -
| UL - Damp Locations, UL - Wet location (with Select Trims), UL Listed - Feed Through wiring, Install A JA8-2016-E Lamp For Title 24 Compliance, Airtight Per ASTM E-283, UL Listed For Direct Contact with Insulation and Combustible Materials | -
-
-
- Recessed Size
-
| -
3"-
| -
-
-
- Wattage
-
| -
| 14 Watts | -
-
-
| Dimmability | -
| Based On Lamp | -
-
-
- Dimensions
-
| -
- See Illustrations/See Spec Sheet
-
| -
-
-
-
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Construction/Installation
▪ Single Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions. Steel Housing for greater heat dissipation.
▪ Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for ceiling plenums where 2x6 joists or taller are used. Stamped Galvanized steel frame. Maximum hole cut-out 3 5/8".
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts, Pry-out knockout slots, Four (4) Romex pry-outs with strain relief.
▪ See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Input Voltage: 120VAC. Inherently protected.
Dimmability
▪ Based on lamp selection
Compatible Trims
▪ Compatible with - ELCO 3" LED Inserts, LED Modules, or PSA37 with 3" MR16 Trims.
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
▪ Airtight per ASTM E-283. Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
