 |
 |
 |
 |
|
 |
|
Features
Construction/Installation
▪ Double Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions.
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for ceiling plenums where 2x6 joists or taller are used. Aluminum Housing for greater heat dissipation. Stamped Galvanized steel frame.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size pry-out conduit knockouts, Four (4) Romex pry-outs with strain relief.
▪ See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Input Voltage: 120VAC. Output Voltage: 12V AC. Max Wattage: Electronic Transformer. Thermally protected against improper lamping.
Dimmability
▪ Electronic Transformer dims with ELV type dimmers. Lamp choice may affect dimmability.
Compatible Trims
▪ Compatible with - ELCO Low Voltage MR16 Trims: Sold Separately! Lamp: 50W Max 12V MR16 GU/GX5.3 Bi-Pin LED or Halogen lamp not included. EL2699ICEA Electronic Transformer recommended for use with 3W-50W lamps only.
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with shower trims, UL Listed for Feed Through
▪ Airtight per ASTM E-283. Install a JA8-2016-E Lamp/Luminaire for Title 24 Compliance
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
