 |
 |
 |
 |
|
 |
|
Features
Construction/Installation
▪ Double Wall IC Rated for direct contact with insulation, for use in IC and non-IC conditions.
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Suitable for T-grid and drop ceiling applications.
▪ Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
▪ Designed for ceiling plenums where 2x6 joists or taller are used. Steel housing for greater heat dissipation. Stamped Galvanized steel frame.
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Seven (7) 1/2" trade size conduit knockouts, Four (4) 3/4" knockouts with pry-out knockout slots.
▪ Four (4) Romex pry-outs with strain relief. See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Maximum hole cut-out is 4 1/4".
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with joists.
Electrical
▪ Input Voltage: 120VAC. Output Voltage: 12V AC. Wattage: 50W. Thermally protected against improper lamping.
Dimmability
▪ Based on lamp selection. Magnetic Transformer dims with MLV type dimmers. Lamp may affect dimmability.
Compatible Trims
▪ Compatible with - ELCO 4" MR16 Trims and designed for use with 12V MR16 50W GU/GX5.3 MR16 LED Bulbs: Sold Separately!
Listing
▪ UL Listed for Damp Locations. UL Listed Wet Location with select trims, UL Listed for Feed Through
▪ Airtight per ASTM E-283. CA Title 24 JA8 Compliant
▪ UL Listed for Direct Contact with Insulation and Combustible Materials.
|
|
|
|
|
|
|
