 |
 |
 |
 |
|
 |
|
Features
Construction
▪ Height allows for 2x6 construction. Suitable for T-grid and drop ceiling applications. IC Rated for Direct Contact with R60 spray insulation.
▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. For use in IC and Non-IC conditions
▪ Aluminum housing for greater heat dissipation. Stamped galvanized steel frame
▪ Driver mounted on junction box for cooler LED operation. Designed for shallow ceiling plenums where 2x4 joists or taller are used
Junction Box
▪ Positioned to accommodate straight conduit runs.
▪ Three (3) 1/2" trade size pry-out knockouts, One (1) 3/4" knockout, One (1) 1/4" knockout, Four (4) Romex pry-outs with Strain relief for easy romex installation.
▪ Strain clamps to install or remove covers for easy access and grounding. See installation sheet for detailed information
Hanger Bars / New Construction
▪ Pre-installed hanger bars with True Nail easy installation in regular lumber, engineered lumber and laminated beams. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
▪ Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction
Electrical
▪ Driver connects to 120V power supply. High Efficiency driver with a power factor > 0.9. Optional (Sold Separately): 90 Minute Emergency Battery pack available with test indicator switch. Must have access from above ceiling for maintenance.
Dimmability
▪ Works with 120V Triac and ELV type dimmers. Dims down to 10%. For full list of dimmers, refer to Compatible Dimmer List.
Compatible Trims
▪ Compatible with - E210C06, E213C06, E214C06, E215C06, E218C06, E219C06
Listing
▪ UL Listed for Wet Locations, UL Listed for Direct Contact with Insulation and Combustible Materials
▪ Meets restricted airflow requirements (per ASTM E-283)
▪ UL Listed for Feed Through, CA Title 24 JA8-2016-E
|
|
|
|
|
|
|
