|
|
|
|
Part Number: E2AJU12ICA
2" IC R60 Airtight New Construction HIGHTECH Housing
Trims: Compatible with - E210C18, E213C18, E214C18, E215C18, E218C18, E219C18 Series
Wattage - 14w Voltage - 120/277v Dimmable - Triac/ELV/0-10V
- Double Wall IC rated for max. R-60 spray foam insulation
- 3 in 1 dimming, 120-277V, Triac/ELV (120V only), 0-10V
- Height allows for use in 2x6 construction
- Driver included on housing
- LED Light Engine sold separately
- Suitable for Chicago Plenum construction
- Fireproof and Battery Back up with ELCO accessories: Sold Separately!
- U.S. Patent 10,281,131
- 5 year factory warranty (limited)
- UL Listed for Wet Location
- UL Listed for Feed Through
- Meets restricted airflow requirements (per ASTM-283)
- CA Title 24 compliant
-
-
-
-
-
- Tech Specs
-
| -
-
-
|
-
-
-
| -
-
| -
-
-
- Material
-
| -
Aluminum Housing/Stamped Galvanized Steel Frame | -
-
-
- Construction Type
-
| -
- New/HIGHTECH
| -
-
-
- Bar Hangers
-
| -
- 24" And Can Be Repositioned 90°
| -
-
-
- Dimmability
| -
3 in 1 Dimming, 120V Triac/ELV (120V only), 0-10V | -
-
-
- Input Voltage
-
| -
- 120V AC
-
| -
-
-
- Knockouts
| -
(2) 1/2" Trade Size Pry-Out, (4) Romex Pry-Outs with Strain Relief | -
-
-
- Approval Type
-
| -
UL - Wet location, C-UL - Feed-through wiring, CA Title 24 Compliant | -
-
-
- Recessed Size
| -
2" | -
-
-
Wattage | 14 Watts | -
-
-
Voltage Rating | -
120/277V | -
-
-
Dimensions | -
See Illustrations/See Spec Sheet | -
-
-
-
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
Construction ▪ Double wall rated for ma. R-60 spray foam installation. IC Rated for direct contact, for use in IC and non-IC conditions ▪ Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Maximum hole cut-out is 2 5/8" ▪ Aluminum housing for greater heat dissipation. Stamped galvanized steel frame ▪ Driver mounted on junction box for cooler LED operation. Designed for shallow ceiling plenums where 2x6 joists or taller are used
Junction Box ▪ Positioned to accommodate straight conduit runs. ▪ Two 1/2" trade size pry-out knockouts, four Romex pry-outs with strain relief for easy romex installation ▪ Strain clamps to install or remove covers for easy access and grounding
Hanger Bars / New Construction ▪ Pre-installed hanger bars with True Nail easy installation in regular lumber, engineered lumber, and laminated beams. ▪ Integral T-bar slots for easy installation. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction
Electrical ▪ Driver connects to 120/277V power supply. High Efficiency driver with a power factor > 0.9. Provides up to about 1250lm at 14 Watts
Other Features ▪ Suitable for Chicago Plenum construction. LED Light Engine sold separately. Driver included on housing. Suitable for T-grid and drop ceiling applications.
Emergency Battery Pack ▪ Optional 90 minute battery pack available with test indicator switch. Note that double wall housings require Access From Above Ceiling for Battery Maintenance
Listing ▪ UL Listed for Wet Location, UL Listed for Feed Through ▪ Meets restricted airflow requirements (per ASTM-283) ▪ CA Title 24 Compliant
|
|
|
|
|
|
|